Announcement

Collapse
No announcement yet.

New Members - please post your introductions here

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: New Members - please post your introductions here

    Hi I'm Dal from Switzerland. I am interested in rare schematics and bios programming.

    Comment


      Originally posted by QED View Post
      Hi All,

      I've been lurking for a while reading the Samsung 225 and 245 threads with regards to common problems and its been a real educational trip.
      I have a couple of AIWA GE-Z7100 graphic equaliser displays that I want to repair also , so this forum should be a good place to help that project.

      Just for the record, I have a number of children with learning difficulties and behavioural problems who take up a lot of my time (and I mean a lot) so if you post back with a reply to any of my future posts, be assured that I am not ignoring you , but have had to do my parenting job which comes before anything else.

      Thanks to all.

      Ian ,Hadfield, Derbyshire, UK
      hi if you get one of the GE-Z7100 boards working would i be able to bye it off you please

      Comment


        Re: New Members - please post your introductions here

        hello everybody, im nizam from turkey.

        Comment


          Re: New Members - please post your introductions here

          Hello everyone,

          i wish you good luck with your next repair.

          Conrad

          Comment


            Re: New Members - please post your introductions here

            Hi, I'm Ed. Been replacing bad caps - and other misbehaving components in electronics
            gear since the 60's. Still enjoy it - and I really enjoy other's "war stories"!

            Comment


              Re: New Members - please post your introductions here

              hello!

              Comment


                Re: New Members - please post your introductions here

                Hi everyone,
                I'm a french Guy, 59 years old, living near Toulouse, interested in electronics. My english is enough to understand the topics, but not as good as yours. So, pardon me for my future mistakes !
                I'm here because i watch Learn Electronic Repairs on you tube. This man is great and recommand your site, so...
                Greetings from France !

                Comment


                  Re: New Members - please post your introductions here

                  General Technical Chat / Re: New Member, Please introduce yourself
                  « on: September 20, 2018, 05:50:37 pm »

                  This is my introductory post to the Badcaps forum. I notice it's somewhat longer than others. Maybe because I'm older than most on this forum.

                  I am a retired EE (electric power) who has dabbled in electronics since the mid 60's. Textbooks were switching from vacuum tubes to solid state as I was in collage and my employment involved practically nothing under 2300V AC unless it was control circuitry (125VDC) or support equipment (480V AC). I worked on auxiliary system design and large motor application for power plants and was the company's "rotating machinery specialist", i.e., the guy the plant called at 3AM when the generator went boom. (the largest motor I've worked on was rated 261,000HP & the largest generator was 800MVA) The motor was the main machine (there were 2) at a pumped storage hydro station. Motor at nite and generator (220MVA) by day.

                  I KNOW what it takes to run a power plant because I've been part of it. Burn 5000 tons of coal a day, get rid of 500 tons of ash (without filling the sky or your room with it), all without blowing the place to kingdom come.

                  I've built many Heathkit bench gear kits starting with the EK-1 VOM and moving up to the IM-13 VTVM (still in daily use after about 60 years) and winding up with the IO-4235 dual trace scope (still in use after 40 years), a couple signal generators & a counter.

                  I have a Rigol MSO2102A & DM3068 bought new when my electronics interest reignited a couple years ago.

                  I designed and built a digital computer using RTL logic in the early 70's a few years before the Altair. It had a whopping 64 BYTES of memory, I/O was via toggle switches and LEDs. Eventually I built an Altair 8800 kit which was my main computer til the Mac Plus in 1985 IIRC.

                  I have a flock of old Mac computers, most of which work including this one (a 2.3GHz G5 tower anchor) which is my newest computer (Circa 2006). It runs OSX 10.4 because 10.5 breaks too much software. (I'm a Mac fanboy because I never liked MS because of Bill's attitude toward hobbyists when he worked at MITS.)

                  Lately I've acquired a bunch of old gear from eBay. The list:

                  2 HP3478A 5 1/2 digit VM

                  3 HP 3456A 6 1/2 digit VM 2 of which I repaired failed inguard PS (1 zener & 1 capacitors)

                  1 Fluke 335D voltage standard & null VM (replaced a bunch of caps)

                  1 HP 6253A dual PS (repaired, failed zener)

                  1 HP 6642A PS

                  1 Wavtek 114 some caps & a couple pots.

                  1 Fluke 510A AC Reference Standard

                  a couple GR decade boxes, a DP1311 Decapot (Kelvin Varley divider which I'd never heard of til Dave Jones (EEVblog) mentioned it) & an ESI D887 Deka box. All seemingly in spec or close enough.

                  My main interests in electronics are power supplies (usually model RR throttles), repairing (& building) test gear, voltnuttery, test & measurement, digital computers & digital circuitry in general. Most of my hobby work is usually in support of something digital (Arduino these days). I never really understood the pole & zero stuff.

                  For me, positive current flows from the plus terminal to the minus terminal & we should have never let the physicists name the terminals on a FET.

                  Sayings:

                  Never remember anything you can look up. (Einstein)

                  Groves giveth and Gates taketh away. (?)

                  Fred_47
                  Fred Lotte, PE (not current), BEng, MEng
                  Ohio, USA

                  Chief caretaker at Fred's home for retired test equipment.

                  Comment


                    Re: New Members - please post your introductions here

                    Hola,
                    Soy un tecnico de Informatica que estoy empezando con la microelectronica, e visto muchisima informacion en este foro con la que poder ir mejorando dia a dia.

                    Comment


                      Re: New Members - please post your introductions here

                      witam wszystkich maniaków elektroniki

                      Comment


                        Re: New Members - please post your introductions here

                        hello

                        Comment


                          Re: New Members - please post your introductions here

                          Hello everyone. I'm a computer engineering. My ne is Richard and I'm from Nigeria. Happy to be here on this platform.

                          Comment


                            Re: New Members - please post your introductions here

                            Hello everyone. I'm a computer engineering. My name is Richard and I'm from Nigeria. Happy to be here on this platform.

                            Comment


                              Re: New Members - please post your introductions here

                              Hola a toda la comunidad!!! Gracias por aceptarme en esta hermosa comunidad, soy Lucirtec tengo 42 años soy de Buenos Aires Argentina, sigo aprendiendo es por eso que terminé aquí.

                              Espero poder encontrar y solventar mis inquietudes y dudas, en lo que pueda colaborar puedrn contar conmigo como un humilde servidor. Saludos

                              Comment


                                Re: New Members - please post your introductions here

                                Hellooo. Names Charlie, just recently had a sharp lc-70le734u crap out on me so I'm going to look around and see what I can figure out! Thanks!

                                Comment


                                  Re: New Members - please post your introductions here

                                  Name:- Nitish singh
                                  Currently a student i work part-time in a computer repair center i have lots of questions to ask i hope u guy will help me out in my journey to be a engineer
                                  And I'm an orphan

                                  Comment


                                    Re: New Members - please post your introductions here

                                    Hello from Poland

                                    Comment


                                      Re: New Members - please post your introductions here

                                      Hello, my name is Mike. I have some electronic background so I do my best to repair also looking forward to be helpful where I can.

                                      Comment


                                        Re: New Members - please post your introductions here

                                        Hi guys! I don't have much knowledge regarding modern computers but hopefully I can find mates here who can help me throughout.

                                        Comment


                                          Re: New Members - please post your introductions here

                                          Hello from the smallest part of the world!

                                          Comment

                                          Working...
                                          X