Re: Digihome PTDR32FHDS5 (Vestel) 32" LED Smart TV
Apply a positive voltage of approx. 3v to the DIM pin and see if the LEDs light up more strongly. You can apply the voltage from the stb voltage through a resistor. Don't forget to replace the filter electrolyte as well.
Or you can cut short between the BL / on and DIM pins.
Apply a positive voltage of approx. 3v to the DIM pin and see if the LEDs light up more strongly. You can apply the voltage from the stb voltage through a resistor. Don't forget to replace the filter electrolyte as well.
Or you can cut short between the BL / on and DIM pins.
Comment