Announcement

Collapse
No announcement yet.

Samsung un58j5190 power supply failed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung un58j5190 power supply failed

    I need a component # on my power supply board. Backlights failed and shorted the transistor that regulated the power to them. Model number is: UN58J5190AFXZA. Board number is: BN44-00787A. Part is located on back side near the backlights power plug. Location ic Q9102C. Transistor is heat damaged and I can't read the number. Can anyone help?

    #2
    Re: Samsung un58j5190 power supply failed

    Originally posted by cspiddler View Post
    I need a component # on my power supply board. Backlights failed and shorted the transistor that regulated the power to them. Model number is: UN58J5190AFXZA. Board number is: BN44-00787A. Part is located on back side near the backlights power plug. Location ic Q9102C. Transistor is heat damaged and I can't read the number. Can anyone help?
    I've had trouble posting my pics let me see if 3rd try is a charm.
    Attached Files

    Comment


      #3
      Re: Samsung un58j5190 power supply failed

      Originally posted by cspiddler View Post
      I’ve had trouble posting my pics let me see if 3rd try is a charm.
      Hello,
      it will be a FET. Can you read the part number on the driver IC, located beneath the burned component?
      Searching its datasheet would give an idea, because manufacturers often use the recommended solution from the datasheet. But there are a few other things to take into consideration: why has it failed so badly? You have to find it out, maybe the backlight LEDs have made contact with the metal chassis? Also, when this FET goes bad, the driver IC and a few other surrounding components also go bad.

      Edit: Found it. AOD3N40. But you still need to find the reason it has failed so badly.
      Last edited by yohnsee; 11-11-2018, 12:41 PM.
      Cheers, Janos

      Comment


        #4
        Re: Samsung un58j5190 power supply failed

        Check Shopjimmy and see their note: https://www.shopjimmy.com/samsung-un...repair-kit.htm
        "This model has an above-average rate of LED strip failure"

        Comment


          #5
          Re: Samsung un58j5190 power supply failed

          Thank you very much. I think I have some 3N40s on some other junk boards I’ve collected. The IC looks like an SEM 5027A. Don’t know if I have one of those but $3 maybe. Tkhe nearby resistor and diode on the top side of the board seem ok. Looking at the board I thought it would be junk but I checked the traces from the FET and all had “0” ohm continuity and none were shorted to other traces so I thought I might replace a few components and see if the board will fire back up. I’ve been to ShopJimmy and they say if the backlights fail likely it will crash the board, so backlights are next. Just a hobby to keep my old retired brain going. So if I can fix for little or nothing I can find someone that needs. Thanks again.

          Comment


            #6
            Re: Samsung un58j5190 power supply failed

            Just an add-on if someone reads this post. Got a backlight taster and the backlights were bad which is what burned out the power board. May help you diagnose if you see this damage. Hard to make a case for repair when I have no use for it and the value is close to the repair cost. I mostly donate them anyway and like donations that bring several times the investment. Anyway this forum is a great resource and I appreciate the help. Thanks again.

            Comment


              #7
              Re: Samsung un58j5190 power supply failed

              Here's a close up shot, had a power supply in stock. Hope it help. Looks like its made by Alpha & Omega

              Da Bears!
              Attached Files
              Last edited by brucetv; 11-17-2019, 02:57 PM.

              Comment


                #8
                Re: Samsung un58j5190 power supply failed

                Hey "cspiddler", I just wanted to thank you for this post! A buddy of mine gave me this TV and when I opened it up the exact same problem was very evident on the power board. This post saved me a lot of time, thank you.

                Comment


                  #9
                  Re: Samsung un58j5190 power supply failed

                  Originally posted by jeffreyulrich
                  Wouldn't it be better for you to change a bn44-00787a? It's cheap. It's only 26 dollars

                  https://w***************************...***********tml
                  Are you only here to sell your parts?
                  Last edited by SMDFlea; 03-31-2020, 08:27 AM. Reason: Spam link removed from reply to a spammer

                  Comment


                    #10
                    Re: Samsung un58j5190 power supply failed

                    Originally posted by r_j View Post
                    are you only here to sell your parts?
                    +10
                    Never stop learning
                    Basic LCD TV and Monitor troubleshooting guides.
                    http://www.badcaps.net/forum/showthr...956#post305956

                    Voltage Regulator (LDO) testing:
                    http://www.badcaps.net/forum/showthr...999#post300999

                    Inverter testing using old CFL:
                    http://www.badcaps.net/forum/showthr...er+testing+cfl

                    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                    http://s807.photobucket.com/user/budm/library/

                    TV Factory reset codes listing:
                    http://www.badcaps.net/forum/showthread.php?t=24809

                    Comment


                      #11
                      Re: Samsung un58j5190 power supply failed

                      Well! It's a moot point now. I cracked the screen while relocating it. I need to get me a pair of those suction cup screen holders.

                      Comment


                        #12
                        Re: Samsung un58j5190 power supply failed

                        https://www.harborfreight.com/search?q=suction%20cup

                        Comment


                          #13
                          Re: Samsung un58j5190 power supply failed

                          Have two power supply boards with blackened areas above Q9102C for UN58H5202. The marking is 5N40 (NCH, 5A, 400V) and not 3N40 (3A). If Q9101C is shorted, part is 50R380CE (NCH, 500V, 14A, 0.38ohm). Will need to order the parts from Digikey.
                          Attached Files

                          Comment


                            #14
                            Re: Samsung un58j5190 power supply failed

                            Please note, if the power supply has been repaired or replaced, the error has not yet been resolved, often seen with these models that flashover at the LED strips is the cause.
                            Attached Files

                            Comment

                            Working...
                            X