I am attempted to replace this capacitor to repair a power supply. I put in a random used NCC KXG 450v/100uF and it worked but it's too tall and skinny to reinstall the heatsink and even if I drill a big hole in the heatsink for the cap it would still be too tall and the power supply will no longer fit in the network switch.
The original cap seems to be 35mm in diameter and maybe 25mm in height. I could probably go up to 30mm in height and be OK.
Thanks for any help with a source for these, I only need one or two, and the cheaper the better. I found some on eBay that may work but they're either lousy/no-name brands or they might be fake.
The original cap seems to be 35mm in diameter and maybe 25mm in height. I could probably go up to 30mm in height and be OK.
Thanks for any help with a source for these, I only need one or two, and the cheaper the better. I found some on eBay that may work but they're either lousy/no-name brands or they might be fake.
Comment