Announcement

Collapse
No announcement yet.

Sharp Aquos - Horizontal Line and flickering colors.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #41
    Re: Sharp Aquos - Horizontal Line and flickering colors.

    I have a similar problem with my Sharp Aquos LC-60C8470U
    But the lines completely go away when i change the setting to AquoMotion480
    The lines are only visible with a grey or neutral color backround, and are not visible on white and barely on black backround.

    Comment


      #42
      Re: Sharp Aquos - Horizontal Line and flickering colors.

      Probably because for 480P aqua motion uses a different part of the gate drivers that haven't been affected.

      Almost have to see a picture with both modes To tell you what's really going on
      Did I leave the soldering iron on?

      Comment


        #43
        Re: Sharp Aquos - Horizontal Line and flickering colors.

        Thanks Badcaps. I have followed the directives from j3st3r12 and I saved my LC-60EQ10U.

        Comment


          #44
          Re: Sharp Aquos - Horizontal Line and flickering colors.

          Also experiencing this problem...disconnected the right circuit(if looking at front of tv) image went clear vs the flickering but had a horizontal line at the very top... obviously the right side of the screen went darker as well. So you're telling me, if I cut those tabs/ribbon cables, the flickering will stop, horizontal line will disappear, and the screen comes back to normal in regards to brightness?

          Comment


            #45
            Re: Sharp Aquos - Horizontal Line and flickering colors.

            Solid info in this thread. My 70 is suffering from the rolling flicker. Gonna try to diag and fix tonight. I'll update.

            Comment

            Working...
            X