Badcaps Forums - View Single Post - 4700uF 6.3v and 3300uF 16v in a 10mm Diameter

pc7fan · 10-19-2020, 05:19 PM

They used KMG for a reason, those aren't areas that require high ripple current, thus 105° GP caps deem appropriate for decoupling. I have also seen good 10mm 16/3300 and 6.3/4700 Fuhjyyu TN that indeed tested around 3300 and 4700 respectively in old SP Antecs and Apevias. Since Fuhjyyu TN are general purpose, reducing to 3300u low-Z caps shouldn't be an issue whatsoever, plus that may reduce the risk of oscillations and will roughly match in ripple current ratings.

10-19-2020, 05:19 PM	#24
pc7fan Badcaps Veteran Join Date: Aug 2013 City & State: Maritimes My Country: Canada Line Voltage: 250V Split-phased, 60 Hz I'm a: Hobbyist Tech Posts: 52	Re: 4700uF 6.3v and 3300uF 16v in a 10mm Diameter They used KMG for a reason, those aren't areas that require high ripple current, thus 105° GP caps deem appropriate for decoupling. I have also seen good 10mm 16/3300 and 6.3/4700 Fuhjyyu TN that indeed tested around 3300 and 4700 respectively in old SP Antecs and Apevias. Since Fuhjyyu TN are general purpose, reducing to 3300u low-Z caps shouldn't be an issue whatsoever, plus that may reduce the risk of oscillations and will roughly match in ripple current ratings. Last edited by pc7fan; 10-19-2020 at 05:27 PM..