View Single Post
Old 02-10-2021, 11:28 PM   #7
events.b
Member
 
Join Date: Oct 2010
City & State: Florida
My Country: USA
Line Voltage: 120VAC 60Hz
I'm a: Hobbyist Tech
Posts: 23
Default Re: Sceptre X505BV - Logo appears for 1 sec then backlight shuts off, LEDs tested goo

Hello, after the LED shutdown, the voltages are as follows:

The 400V caps near the LED backlight connector are at 0.4V
The signal labeled "BK" is 4.5V
The signal labeled "ADJ" is 4.1V
events.b is offline   Reply With Quote