View Single Post
Old 10-03-2021, 12:58 AM   #2
Per Hansson
Super Moderator
 
Per Hansson's Avatar
 
Join Date: Jul 2005
City & State: ----
My Country: Sweden
Line Voltage: 230v 50Hz
I'm a: Knowledge Seeker
Posts: 5,138
Default Re: Dead but clicking Hanns-G HC194D?

Normally this would be the small startup cap on the primary side that is dead (C8 or C10).
However I can visually see that the small green caps inside the heatsink (C62 for example) are bulging.
So just replace all caps you did not replace the last time.
__________________
"The one who says it cannot be done should never interrupt the one who is doing it."
Per Hansson is offline   Reply With Quote