I have a noisy APC Smart UPS 1000 that has a single RBC7.
I have someone interested in selling me a APC Smart UPS 2200XL.
The 2200XL unit does not turn on, so it might be that the batteries require replacement or that the unit itself is dead.
1. Would I be able to plug the RBC7 that I have into one of the connectors of the APC Smart UPS 2200XL and have it come up (hence telling me the unit itself is good and the batteries require replacement)?
The APC Smart UPS 2200XL requires two batteries - APC calls the pair RBC11.
Here is the schematic for the 2200XL:
2. If the APC Smart UPS 2200XL turns out to be working, I would like to keep it running on a single RBC7 - since I really don't need the output power of the 2200XL (I would only be connecting 700W worth of load to it at any time)
Has anyone tried to run an APC Smart UPS 2200(XL) off a single RBC7 instead of loading it up with the specified RBC11
3. I guess what I am asking is if the APC Smart UPS 2200 "sees" the RBC11 as a single 24V battery or as two separate 24V batteries.
If the APC Smart UPS 2200 "sees" the RBC11 as a single 24V battery, I might be able to cheat it and get it to operate off a single RBC7.
However, if the APC Smart UPS 2200 "sees" the RBC11 as two separate 24V batteries, I might not be able to make it operate off a single RBC7.
4. Has anyone tried to check if the RBC11 is compatible with 2 * RBC7?
I have someone interested in selling me a APC Smart UPS 2200XL.
The 2200XL unit does not turn on, so it might be that the batteries require replacement or that the unit itself is dead.
1. Would I be able to plug the RBC7 that I have into one of the connectors of the APC Smart UPS 2200XL and have it come up (hence telling me the unit itself is good and the batteries require replacement)?
The APC Smart UPS 2200XL requires two batteries - APC calls the pair RBC11.
Here is the schematic for the 2200XL:
2. If the APC Smart UPS 2200XL turns out to be working, I would like to keep it running on a single RBC7 - since I really don't need the output power of the 2200XL (I would only be connecting 700W worth of load to it at any time)
Has anyone tried to run an APC Smart UPS 2200(XL) off a single RBC7 instead of loading it up with the specified RBC11
3. I guess what I am asking is if the APC Smart UPS 2200 "sees" the RBC11 as a single 24V battery or as two separate 24V batteries.
If the APC Smart UPS 2200 "sees" the RBC11 as a single 24V battery, I might be able to cheat it and get it to operate off a single RBC7.
However, if the APC Smart UPS 2200 "sees" the RBC11 as two separate 24V batteries, I might not be able to make it operate off a single RBC7.
4. Has anyone tried to check if the RBC11 is compatible with 2 * RBC7?
Comment