View Single Post
Old 11-17-2021, 07:22 PM   #30
Join Date: Feb 2010
City & State: Ames Iowa USA
Line Voltage: 120VAC 60Hz
Posts: 69
Default Re: Motor control board repair

Well, I found the problem causing no -15V. It's the connector. It's not making good contact, but I'm sure I accidentally bent that pin when I was originally trying to measure transformer output voltages. So I'll have to either fix that or replace the connector. I've seen this type before so I assume I can find one.

So now I guess I power it up on 120V with attention to that connector and see what I get.
cyclones is offline   Reply With Quote