Garmin Nuvi 3590LM Help identifying component

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Iph
    New Member
    • Jan 2021
    • 3
    • Norway

    #1

    Garmin Nuvi 3590LM Help identifying component

    I haven't been able to find a visual match in my search. Hopefully what this is, may be obvious to a lot of you guys. What is this?


    Alt:
    https://imgur.com/3b9Zpmx


    Also, any hints on where to find specs, or how to diagnose it? Without knowing what it is, I'm nit quite sure how to tell if it's busted or not.

    FWIW, this is a Garmin Nuvi 3590LM that won't charge or communicate over USB after the user inserted the micro-USB plug the wrong way. Functional when charging battery by other means (bench psu), but USB seems dead. I replaced the USB 3311C transciever/controller chip, but no go.
    Last edited by SMDFlea; 08-20-2021, 03:06 AM. Reason: Garmin Nuvi 3590LM
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30950
    • Albion

    #2
    Re: Garmin Nuvi 3590LM Help identifying component

    it's a crystal.
    probably 32.768KHz - but dont presume that

    Comment

    • R_J
      Badcaps Legend
      • Jun 2012
      • 9529
      • Canada

      #3
      Re: Garmin Nuvi 3590LM Help identifying component

      I agree, it's a Crystal, Likely Epson, case MC-146
      E- symbol
      A - freq 32.768kHz
      B - Production year
      G - Production month

      Comment

      Related Topics

      Collapse

      • PCTechnics
        Garmin Striker plus 4 fishfinder help identifying fried smd's
        by PCTechnics
        Hi guys, a friend of mine brought me a fried Garmin Striker plus 4 fishfinder with GPS (thanks to the boat tech who inverted the power cord at installing. I need help to identify this smd resistor look a like, it could be an inductor i think (no serigraphy) completely broken. And the tiny one could be a diode.Many thanx in advance!...
        02-15-2020, 06:20 PM
      • omaar
        Help Identifying an IC
        by omaar
        I need help identifying this IC and, if possible, the value of the capacitors next to it. It is part of the HDMI circuit of an EVGA RTX 2060 GPU. It suffered a short circuit, leaving the graphics card without video and the TV without image....
        06-06-2025, 07:48 PM
      • Digital Solutions
        Help Identifying IC on MacBooks Pro - 820-02020
        by Digital Solutions
        Subject: Help Identifying IC on 820-02020 (MacBook Pro A2338 M1, 2020) — C02045500 / EKQ8LL1A


        Hi all,


        I'm working on a MacBook Pro A2338 M1 (2020) with logic board 820-02020.

        The machine has a power issue — not powering on, and I'm trying to trace the fault.


        While inspecting the board, I found a cluster of components


        This area looks damaged or burned — there are about 4–5 components that seem affected


        I've attached a close-up photo of the chip and its surrounding area (see...
        06-05-2025, 03:43 AM
      • Adubey
        Garmin Dashcam 20
        by Adubey
        Hi All, I have a Garmin Dashcam 20. It allows functions to work only if SD card is inserted but it freezes upon inserting a working SD card. So far I have cleaned the SD card socket with alcohol and all of the connections looks good. I also tried using a brand new class 10 SD card as its manual requires but still its not working. Garmin Express is also not able to detect the device.

        I am able to get into menus using a bad SD card.

        Let me know if anyone has ideas on what to do.
        10-02-2023, 05:29 PM
      • m1ch43lzm
        70mai Dash Cam A510 - help identifying connector on camera module
        by m1ch43lzm
        Hi everyone
        I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
        The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines

        I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
        05-11-2025, 06:02 PM
      • Loading...
      • No more items.
      Working...