Picked this up from thrift store. I get no power when pressing power button. I tested the power switch and I'm getting 124v coming out of the power switch pcb board going to the transformer when the power button is engaged. I looked for fuses or "open" fusible resistors. There are no fuses and none the fusible resistors are "open". I didn't see anything burned, etc on any of the boards. I suppose my next step would be to test the 6 wires coming off of the transformer? Can anyone tell me how to do that?
Here's the service manual...
THANKS IN ADVANCE!!!!
Ps...one odd thing I did notice was that there's a wire ring/lug screwed onto the metal of the cd transport assembly that has had its wire snipped off. The manual shows that wire going to one of the screws securing the main pcb board to the bottom chassis in the area of the power supply.
Here's the service manual...
THANKS IN ADVANCE!!!!
Ps...one odd thing I did notice was that there's a wire ring/lug screwed onto the metal of the cd transport assembly that has had its wire snipped off. The manual shows that wire going to one of the screws securing the main pcb board to the bottom chassis in the area of the power supply.
Comment