Announcement

Collapse
No announcement yet.

SAMSUNG NP700Z7C - BIOS dump needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: SAMSUNG NP700Z7C - BIOS dump needed

    There is original, maybe corrupted:
    Attached Files

    Comment


      #22
      Re: SAMSUNG NP700Z7C - BIOS dump needed

      Here
      Techman1025
      Attached Files

      Comment


        #23
        Re: SAMSUNG NP700Z7C - BIOS dump needed

        try this.
        Attached Files
        Last edited by whaldsz; 04-04-2017, 11:28 PM.

        Comment


          #24
          Re: SAMSUNG NP700Z7C - BIOS dump needed

          Thanks for fast answer. Flashed with techman1025 dump now I have progres bar with Phoenix logo but stucked, can't enter into bios with F2 or F4. With whaldsz dump behaves same as original...
          I think motherboard is bad??
          There's pictures:
          Attached Files

          Comment


            #25
            Re: SAMSUNG NP700Z7C - BIOS dump needed

            Hi
            Pull Cmos battery for a few min and hold power button down then plug adapter only and retry.
            Techman1025

            Comment


              #26
              Re: SAMSUNG NP700Z7C - BIOS dump needed

              I tried it already...
              Customer says that sometimes the start, after many attempts. The disc is correct, it is possible that the failure of the board ...

              Comment


                #27
                Re: SAMSUNG NP700Z7C - BIOS dump needed

                Hi
                You could try a new bios chip and reprogram it with mine. Also try with only one memory stick in and do the same for the other socket see if it hangs so only one at a time you might have a bad stick of memory or a bad socket if one socket is bad double up on one socket is the only fix.
                Techman1025

                Comment


                  #28
                  Re: SAMSUNG NP700Z7C - BIOS dump needed

                  Originally posted by bello View Post
                  I tried it already...
                  Customer says that sometimes the start, after many attempts. The disc is correct, it is possible that the failure of the board ...
                  ok, try again with this one.
                  Attached Files

                  Comment


                    #29
                    Re: SAMSUNG NP700Z7C - BIOS dump needed

                    @techman1025
                    I tryed it also, one memory is soldered on the board and can't remove it. Also tryed with another bios chip...

                    @whaldsz
                    Nothing, same as other...

                    Anyway thanks a lot.
                    E.Lelic

                    Comment


                      #30
                      Re: SAMSUNG NP700Z7C - BIOS dump needed

                      Hi
                      What i would do is put some good flux under the onboard memory chip's and apply a little heat like 100C then retest if it works you could always replace them.
                      Techman1025

                      Comment


                        #31
                        Re: SAMSUNG NP700Z7C - BIOS dump needed

                        I tried to provoke him in the hot state, but nothing...
                        I think I'll give up.

                        Comment


                          #32
                          Re: SAMSUNG NP700Z7C - BIOS dump needed

                          I AGREE
                          Techman1025

                          Comment


                            #33
                            Re: SAMSUNG NP700Z7C - BIOS dump needed

                            NP700Z7C ba92 11017b dump maybe? accidentally erased the stock firmare before backup it first in my programer. I tried with last firmware whaldsz posted for BA92-10916B and only get backlight of the display and then he is restarting again and again and again

                            Comment


                              #34
                              Re: SAMSUNG NP700Z7C - BIOS dump needed

                              Hello,
                              I need NP700Z7C BA92-10916A working bios, any chance someone have it?
                              It is stuck in samsung logo.
                              Here is the suspected not working dump.
                              Thanks
                              Attached Files

                              Comment


                                #35
                                Re: SAMSUNG NP700Z7C - BIOS dump needed

                                Hello,

                                The solution to this Samsung Series machine is remove the dead iSSD flash from Sandisk. This cause a long freeze on boot.

                                I hope it helps.

                                Br
                                Attached Files
                                Last edited by xe_d_sono; 07-04-2020, 04:02 PM.

                                Comment


                                  #36
                                  Re: SAMSUNG NP700Z7C - BIOS dump needed

                                  Originally posted by xe_d_sono View Post
                                  Hello,

                                  The solution to this Samsung Series machine is remove the dead iSSD flash from Sandisk. This cause a long freeze on boot.

                                  I hope it helps.

                                  Br
                                  Thank you!!! It's Works

                                  Comment

                                  Working...
                                  X