Re: Cyberpower CP900EPFCLCD - F03 Error
You should have a high DC voltage on C3 - 400 V 10 uF, if it is not there, then the AC voltage does not reach the diode bridge, you need to check the fuse or low-resistance resistor, or the relay between the AC 220v input and the diode bridge did not work.
You should have a high DC voltage on C3 - 400 V 10 uF, if it is not there, then the AC voltage does not reach the diode bridge, you need to check the fuse or low-resistance resistor, or the relay between the AC 220v input and the diode bridge did not work.
Comment