Hello my friends please help. DA0U33MB6E1. REV E

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mohammed mohan
    Badcaps Veteran
    • Nov 2017
    • 201
    • z
    #1

    Hello my friends please help. DA0U33MB6E1. REV E

    I have a motherboard that had a problem when I wanted to replace a damaged piece and the paintings were damaged by mistake. Does anyone of you have a clear close-up picture of this place shown in the attached pictures?

    Board number DA0U33MB6E1. REV E

    Thank you all
    Attached Files
    Mohammed Mohan
    Tags: None
    • mohammed mohan
      Badcaps Veteran
      • Nov 2017
      • 201
      • z
      #2
      Re: Hello my friends please help. DA0U33MB6E1. REV E

      ��
      Mohammed Mohan

        Comment

        • SMDFlea
          Super Moderator
          • Jan 2018
          • 22001
          • UK
          #3
          Re: Hello my friends please help. DA0U33MB6E1. REV E

          The layout is the same in the DA0U33MB6D0 schematic.The parts locations are marked on the board. You can test the capacitance of the dislodged caps but not the voltage !
          .
          Attached Files
          Last edited by SMDFlea; 01-18-2022, 03:41 PM.
          All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

            Comment

            • mohammed mohan
              Badcaps Veteran
              • Nov 2017
              • 201
              • z
              #4
              Re: Hello my friends please help. DA0U33MB6E1. REV E

              thank you my friend
              Mohammed Mohan

                Comment

                Previous template Next

                Related Topics

                Collapse
                • XxMicroSoldering
                  ASUS Rog Strix G17-712LV Laptop Liquid damaged
                  by XxMicroSoldering
                  Hello Guys

                  I have a ASUS Rog strix laptop that I bought recently to fix and the previous owner spilled water on it . He brought it into a repair shop for them to check it out and instead of fixing it they damaged the battery connector of the laptop ! Other than that they damaged damaged nothing . But since the liquid damage the laptop only turns on and the keyboard lights up and then immediately turns off. I really want to repair this laptop and I also have experience in repairing phones etc and laptops and a bit of soldering but the diagnosing part is where I need help with and...
                  3 Photos
                  10-17-2024, 10:45 AM
                • Tomylee
                  Identification of Component T5 on NEXIQ USB-Link 2 (damaged due to crushing)
                  by Tomylee
                  Hi everyone,
                  I'm currently repairing a NEXIQ USB-Link 2 that was physically damaged due to crushing. After a thorough inspection, it appears that only one component is visibly damaged: the T5 component, located right next to the Mini-USB port.

                  It's a 4-pin SMD component, with one pin at each corner, aligned front-to-back along the USB port axis. Unfortunately, it is broken, and there are no visible markings left on the part to identify it.

                  I'm looking for help with the following:

                  The exact identification or part number of the T5 component
                  ...
                  05-28-2025, 12:42 PM
                • tofik
                  LG 50PA6500 Plasma TV damaged after a power spike
                  by tofik
                  Hello, I have an LG 50PA6500 Plasma TV, purchased new in 2012.
                  Unfortunately plasma is not working at all after a power spike.

                  Qucikly tested the PSU and voltages seems to be okay, when eveything is disconntected from the PSU I got:
                  VS = 200-206 / actual = 205 V,
                  VA = 55 / actual = 54.9 V,
                  M5V = 5.2 / actual = 5.19 V,

                  17 = 17.24 V,
                  5.2 = 5.19 V,
                  STDBY = 5.19 V,
                  ERROR_DET = 4.8 V - does it mean PSU is damaged? the rest of the voltages seems to be fine.
                  what's your opinion about the PSU?

                  Also I just...
                  12-20-2022, 03:08 PM
                • Qhuy
                  Razer RZ09-O328, Values For The Damaged Capacitor?
                  by Qhuy
                  Anyone knows the value for the damaged capacitor for the Razer RZ09-0328, Board number is DA550-mb. Please see pictures. Thanks in advance.
                  3 Photos
                  Yesterday, 09:48 PM
                • phantomEVO
                  [help]820-01521 WATER DAMAGED
                  by phantomEVO
                  HELP! audio board+its flex+powerbtn flex water damaged (an hole on audio board)!!! chnged both, but i have 5v on both ports:

                  https://files.fm/f/6gjpqyjw3q

                  here some measurements

                  ppbus_g3h 12,29v
                  PP3V3_G3H 3,29v
                  pp3v3_upc_xa_ldo pp3v3_upc_xb_ldo 3,27v
                  PP1v8_UPC_XB_LDOD PP1v8_UPC_XA_LDOA 1,8v
                  PP1v8_UPC_XA_LDOD PP1v8_UPC_XA_LDOa 1,8v
                  PP1V1_UPC_XA_LDO PP1V1_UPC_Xb_LDO 1,1v

                  with battery connected, as soon as i connect the cable, i see direclty 20v, but stuck at 0,0250
                  10-24-2025, 04:23 AM
                • Loading...
                • No more items.
                Working...