Hp650 problem power with ic tps51225

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • moateez
    Senior Member
    • Jun 2014
    • 119
    • algeria
    #1

    Hp650 problem power with ic tps51225

    hello Friends
    Hp650 not power On i found just 3.3 v on ic TPS 51225 and no 5V

    please ineed equivalent for this ic idont have original ic in my lab


    thnx
    Tags: None
    • moateez
      Senior Member
      • Jun 2014
      • 119
      • algeria
      #2
      Re: Hp650 problem power with ic tps51225

      i found TPS51225C = APW8822C but same probleme also dont have this ic

        Comment

        • ktmmotocross
          Boardkiller
          • Feb 2014
          • 3627
          • slovakia
          #3
          Re: Hp650 problem power with ic tps51225

          why do u think this ic is bad when u not check it

          check all pins for voltage and resistance to ground

            Comment

            • moateez
              Senior Member
              • Jun 2014
              • 119
              • algeria
              #4
              Re: Hp650 problem power with ic tps51225

              Originally posted by ktmmotocross
              why do u think this ic is bad when u not check it

              check all pins for voltage and resistance to ground

              ihave chek it bro

              Vin + Ldo3 +Ldo5

              the ic dont make 5v out

                Comment

                • ktmmotocross
                  Boardkiller
                  • Feb 2014
                  • 3627
                  • slovakia
                  #5
                  Re: Hp650 problem power with ic tps51225

                  did u check pins on that 5V side like if u dont have shorted mosfets, ENTRIP...

                    Comment

                    • moateez
                      Senior Member
                      • Jun 2014
                      • 119
                      • algeria
                      #6
                      Re: Hp650 problem power with ic tps51225

                      Originally posted by ktmmotocross
                      did u check pins on that 5V side like if u dont have shorted mosfets, ENTRIP...
                      yes bro all ok

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • theone111
                          Problem with LG Plasma 60PM6700 - Random power downs
                          by theone111
                          I have an LG Plasma TV 60PM6700 for the past ~12 years.

                          In the last ~3-4 months I have been having some issues.
                          1. Problem: It started with random picture disappearing (sound still worked).
                            Frequency: Happened about once a week.
                            Solution: Had to turn off TV wait a few seconds before turning it on again.
                          2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
                            Frequency: Happened about once a week.
                            Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
                          3. Problem: TV shuts down
                          ...
                          1 Photo
                          07-22-2024, 10:36 AM
                        • Duranitron
                          Asus x512dk rev 2.1 power on problem
                          by Duranitron
                          When I reflash again the bios of hoaca388 the unit powers on and the unit lives!!! Hooray!! All voltage in the coil 3.3v, 5v and 6.7v indicate charging are all present. including the cpu voltage , EEPROM and GPU voltage the unit is now alive, normal screen booting to windows and log in screen until I power it off. Then the unit never goes on even when pressing the power button in the keyboard.. Voltage reading 19v main , 3.3v VCC in IT8225E-128 and EEPROM VCC 0 volt and the charging voltage 0 volt.

                          Try to trace the power switch button goin to the power switch IC PU8803 (APL3533AQBI-TRG)...
                          11-26-2024, 10:22 PM
                        • EazyBone
                          LG OLED55C9PUA power problem
                          by EazyBone
                          Hello, trying to fix C9 55 inch. I have pulled the back and all looks completely normal with nothing burnt so far. This is first time attempting to fix a tv so any help is appreciated.

                          Problem. I hit power button, red light on TV turns off and tries to turn on, no picture shows up and then shuts off. This occurred after house power turned on and off, not from a storm.

                          I have tested the power going from power supply to main board, all 12v and 20 volt readings are proper when I hit power button.

                          The power supply to t con is different story.
                          This...
                          06-23-2023, 07:43 AM
                        • Dr.d
                          Help please..Lenovo ideapad 5 14itl05 power and charging problem
                          by Dr.d
                          I have a lenovo ideapad 5 14itl05, board LA-K321P, That will only power up on Battery only, or with battery disconnected and power adapter only. If battery is connected and usb-c power plug connected. It only works on battery and will not charge. I can however force it to charge by connecting the battery from a disconnected state while the power USB c plug is powering the laptop.

                          Additionally....to add to this strange situation. The usb-c power plug ONLY works to power the laptop on one side when inserted into the boards power usb c plug. If you rotate it 180 degrees, the board gets...
                          04-05-2024, 11:48 AM
                        • sam_sam_sam
                          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                          by sam_sam_sam
                          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                          03-31-2024, 02:12 PM
                        • Loading...
                        • No more items.
                        Working...