Please help me identify these electrolytics brand

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Physios
    New Member
    • Mar 2021
    • 4
    • Italia
    #1

    Please help me identify these electrolytics brand

    Good morning.

    Is it possible to understand the brand of these two smd electrolytic caps from the type of screen printing?

    Thanks
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • turbo1600
      New Member
      • Jun 2021
      • 1
      • australia
      #2
      Re: Please help me identify these electrolytics brand

      whats the pcb from ?

        Comment

        Previous template Next

        Related Topics

        Collapse
        • ckrtech
          Help Identify cap brand and quality, please
          by ckrtech
          This is a cap on a motherboard from 1994. “Ark” is the only brand I know of that has an A inside a rectangle, but I wanted to run it by you guys and get any thoughts on quality.

          Thanks in advance....
          1 Photo
          06-09-2025, 12:28 PM
        • oldirdey
          Need help to identify capacitor brand
          by oldirdey
          Want to repair some broken floppy disk drives. I need help to identify the brand of this capacitor to find a suitable replacement.

          Did someone know the brand of the capacitor or a suitable replacement in terms of esr / ripple?...
          07-15-2021, 03:17 AM
        • Stanley1843
          BEST 505 Vs Mechanic Brand Reballing Balls with Lead
          by Stanley1843
          Hello,
          has anyone use these Brands of solder balls? The brand BEST writes on the label of the jar the specs of the solder balls instead of the Mechanic brand. I beleive that BEST brand must be more professional (in labeling at least) but I have never try one of them so I would like your opinion. By the way I hardly can I find the Mechanic brand in aliexpress (the only where I found was lead free solder balls) and on ebay these that I found are approximately15USD per jar. If you know any other trusted brand of solder balls please tell me.
          06-22-2024, 11:06 AM
        • devsigner
          identify capacitor for MacBook Pro with rare logic board 820-02037-06
          by devsigner
          Hi

          While messing around with my MacBook Pro, I stupidly pinged off a very small surface mounted component that I’m now trying to identify.
          resistance tests show a rising resistance value, indicating a capacitor.

          The laptop boots up and runs, however I'm choosing not to use it until I get it fixed.

          i can’t see any markings on the capacitor at 10x magnification using a professional jewler's loop.

          It seems like there's some damage to the capacitor - one side doesn't have "shiny bits" - can you tell I don't do this for a living!...
          5 Photos
          11-28-2025, 01:39 PM
        • thesame
          DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components
          by thesame
          Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
          The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

          ​...
          02-27-2024, 04:31 AM
        • Loading...
        • No more items.
        Working...