I have this asus GL503E showing blue screen error.When i check the board the core area supply section getting really hot. it is a 3 phase core supply .on one of the phase the lower gate of the fet (PQ99) gate having no pwm it is low condition.all other 2 phase lower and upper gate have the pwm. I have changed the "PU6"and the fets still same any solution.
asus GL503E blue screen error
Collapse
X
-
Re: asus GL503E blue screen error
Install who crasched and provide error information after scanning when bluescreen occurs. Install this in safe mode and then run windows normally for the error to occur. Then again in the crash mode you can gather information about the bug in the who crashed program.
https://www.resplendence.com/whocrashedLast edited by mayss; 05-26-2022, 12:18 PM. -
-
Related Topics
Collapse
-
by jonny0404hello god friends can some one would be kind to tell me which memory ram i need to disable i cant find the schematic or boarview of these laptop do i need to disolder only one memory ram? here are teh pics.thanks...08-06-2025, 02:14 AM
-
by chinhASUS Q420V
Serial number: RAN0LP034069431
Mb: UX3404_MB
:NB6371A_MB_V3
Attached is the main bios
...-
Channel: BIOS Requests ONLY!
-
-
by Ryan.manHello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Hello,
on this laptop acer aspire v571p the led of the power indicator blinks blue for periods of 1s lighted and 3s off after switch on and this indefinitely.
i tried the hard reset, cmos reset, changing the ram without results.
in order to reach the cmos battery i disassembled the laptop and did several mesures with my multimeter.
The 19v, 5v, 3v are well established after the chip 5v-3v. the following signals : 3d3v_aux_kbc (which supplies the sio chip) and 3d3_s5 are well established also.
but the signals: 3dv3_s0, pw_slp_s3# and pw_slp_s4 oscillate at the same...Today, 03:54 PM -
by LvsitanoI am having some trouble with troubleshooting a Asus X532FL rev 2.0 motherboard, which does not power on. So at the first MOSFET, I am getting 19V at the drain, and then 3.2V on both gate and source (compared with ground). Of course, the 2nd MOSFET's source will have 3.2v at source.
First MOSFET is a QM3056M6 and 2nd MOSFET is a QM0930M3
I already checked first MOSFET and source and gate are not shorted (drain with source not shorted either). Also I have 1.7V at the LDO rail (measured at the keyboard connector, as the power button is on the keyboard).
First... - Loading...
- No more items.
Comment