Gigabyte Rx560 - error 43

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3641
    • slovakia

    #1

    Gigabyte Rx560 - error 43

    Gigabyte Rx560 - error 43

    hello have this Rx560 that shows error 43. as mostly it is related to memory i reballed all chips and two memory tests show no error.

    so whe can be problem when error 43?
  • dd10
    Member
    • Dec 2018
    • 12
    • PL

    #2
    Re: Gigabyte Rx560 - error 43

    Try reprogramming the bios

    Comment

    • fab13
      Senior Member
      • Dec 2021
      • 109
      • France

      #3
      Re: Gigabyte Rx560 - error 43

      Hello to you

      . I had the same problem with code 43 and maximum resolution 1024x1080 on my Rx 470. =(


      And unable to install all the drivers. I had to erase the original program and reprogram another BIOS version. Try reprogramming the BIOS with AMDFlash I think. Ideally, save the original bios program on the chips and erase with a programmer found on Aliexpress and then install the correct compatible bios.

      Start by installing a bios from oldest to newest and see if it crashes the system. If nothing does check the voltages on bios and PCI Express level I think. Hoping that the GPU is not faulty. Send a photo with CPU-Z.

      Comment

      • DynaxSC
        Badcaps Veteran
        • Apr 2021
        • 479
        • Poland

        #4
        Re: Gigabyte Rx560 - error 43

        It could be that tserver does not detect a memory error, when the memory is only "somewhat" broken, so that it fails on higher frequencies only.

        There is a way to let tserver test on higher frequencies -> You may try the hint from DrasticRepairs at the end of the thread:

        https://www.badcaps.net/forum/showthread.php?t=101715
        Last edited by DynaxSC; 01-26-2022, 05:14 PM.

        Comment

        • ktmmotocross
          Boardkiller
          • Feb 2014
          • 3641
          • slovakia

          #5
          Re: Gigabyte Rx560 - error 43

          reball did not help so i found some used rams, replace it and bam. everything works

          Comment

          Related Topics

          Collapse

          • Andranik
            Gigabyte G5 MF โ€“ BIOS repair request (ME cleanup + DMI transfer)
            by Andranik
            Hello,
            I need assistance with repairing the BIOS for my Gigabyte G5 MF laptop. The system powers on but freezes on the Gigabyte logo and cannot enter BIOS. Device information:
            • Laptop model: Gigabyte G5 MF
            • Motherboard model: NP50RNx
            • BIOS chip: GD25Q256E (32 MB, SOIC8)
            • CPU: Intel 12th Gen (SRMHY)
            • GPU: GN21-X2-K1-A1
            • RAM: DDR5
            Original board identifiers (DMI data):
            • Serial Number (S/N): 1TNP50RNC2Y003400274
            • MAC Address: D493931E3D2F
            • P/N: 6-77-NP50RNC2Y0-D02-A
            • Board Sticker: NKNP50RNC2Y000003J02102

            (These must be preserved in the repaired BIOS.)โ€‹ Problem description:...
            Today, 05:29 AM
          • ASB
            Gigabyte MX31-BS1 bios problem (BMC initialize error)
            by ASB
            Bios corrupted after a failed bios update attempt. I searched on the net but didn't find any update/ support for MX31-BS1. I tried MX31-BS0 bios from gigabyte and it worked but now the board is giving the following error. It repeats two times and after the restart, goes to bios setup showing the recovery page. If I shut down/ restart then the error appears again. Kindly provide the original bios of Gigabyte MX31-BS1 or help to solve this issue. Thanks....
            03-21-2023, 09:39 AM
          • macabook
            ๐Ÿ› ๏ธ MSI GP75 Leopard MS-17E71 โ€“ No Display, Deep BIOS/EC Troubleshooting
            by macabook
            Hello everyone,

            Iโ€™m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, Iโ€™m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Hereโ€™s a full breakdown:
            ๐Ÿงฉ Initial Issue
            • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
            • External display (HDMI) shows
            ...
            07-24-2025, 02:17 PM
          • surcharge6650
            HP Elitedesk 800 G4 SFF BIOS/EC firmware error (Code 5.2) - Fixable?
            by surcharge6650
            Hello guys,

            I stupidly tried to read out my BIOS & EC flash (with a clamp). This didn't work, I only read FF's. But after this operation, the PC is not longer turning on, just beeps 5 times (and blinks red) then 2 times (blinks white). The manual says this is the error code for: "The embedded controller cannot find valid firmware.".
            I think it locked itself because of my experiment. Is this fixable? I now removed both chips from the board and dumped them, I attach the files in this post hoping someone can help me fix my stupid error. Thanks so much in advance anyone...
            Today, 09:44 AM
          • cr4zychriss
            [Problem/ Request] Bricked TongFang GK7MRFR BIOS
            by cr4zychriss
            Hello everyone,
            I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
            I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details
            • Barebone / Chassis: TongFang GK7MRFR
            • MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
            • Rebrand: PC Specialist
            ...
            11-14-2025, 04:04 PM
          • Loading...
          • No more items.
          Working...