Frigidaire Refrigerator Model FFHS2612LS0 diodes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sam_sam_sam
    Badcaps Legend
    • Jul 2011
    • 6057
    • USA

    #21
    Re: Frigidaire Refrigerator Model FFHS2612LS0 diodes

    Originally posted by captainKKK
    I am not complaining about this fridge, after all it was purchased in 2005 and its not a daily problem. It just seems odd that at any moment, it can start peeing out the water dispenser and flooding the freezer with ice maker continuous over fill in the middle of the night because these diodes decide to give up the ghost.
    There is a know issue about this it has to do with a temperature sensor that failure to a closed position and it makes a mess in the freezer I replace a few them before or it the diode issue as well also there is an issue with the plastic gear that times the functions of the ice maker I have also replaced several of them as well

    I have also stopped fixing these issues and recommend replacing the ice maker and not repairing them because the repair does not always resolve the issue because it will probably return again
    Last edited by sam_sam_sam; 12-03-2022, 07:19 AM.

    Comment

    Related Topics

    Collapse

    • Dvsr
      On M-Audio AV40 active studio speaker's two zener diodes get really hot.
      by Dvsr
      Hi. I need help from wiser guys. I am amateur in electronics and can't figure this out by myself.
      I bought faulty speakers, M-Audio AV40's. Other speaker has all the electronics in it and the other speaker is just passive one powered by the other speaker's amp. Original problem with the speakers was loud buzzing. I figured out that there is something wrong with the capacitors. I went ahead and replaced every electrolytic capacitor on the PCB. The caps are good quality and have the same values as the original ones.
      After replacing the caps I started testing out the speaker. It seemed...
      09-10-2025, 10:20 AM
    • DennisH
      Need Help Identifying This DIODE mounted on a Frigidaire oven control PN:316131600
      by DennisH
      This diode is mounted on a Frigidaire electronic oven control PN:316131600. This diode runs hot enough that the PCB is showing slight burn marks (black soot looking area on PCB above the diode). It looks to me to be coming from the body of the diode.

      The oven control is 22 years old and still works, but I can't get a new replacement, so I'm doing preventative maintenance and replacing a few parts on it that I think could fail - and this is one of them.

      Can any of you identify this diode (see pic) and suggest a replacement that can handle more heat - or if not, can...
      10-18-2022, 07:24 PM
    • caspian
      What Zener Diodes on a Linear Power Supply
      by caspian
      Dear members,

      I have a linear variable power supply with unknown brand name that I used for voltage injection.
      Then it failed. I discovered that its transistors (Q1 and Q2) are shorted.
      In addition, I discovered that its zener diodes are defective.
      I can replace the burned transistors.
      But I do not know the model of the zener diodes. the model number is not marked on the zener diodes.
      Therefore, I cannot replace the zener diodes.
      I do not want to test the zener diodes in a test circuit to discover their model or value.
      no schematics are available...
      05-26-2025, 12:38 PM
    • asr
      Finding replacement diode iPad Pro 3rd gen A1701
      by asr
      Hello, I am looking for help to replace a damaged diode. The tristar was replaced and a diode was damaged in the process. I have a picture of the diode but dont have an exact donor. I mostly have macbooks for donors and only a few ipad and iphone boards. Diode part number: DSF01S30SCAP
      Im not sure where to find the ipad board number. Anybody have an idea where else this diode is used on other boards? Thanks....
      07-09-2024, 06:24 PM
    • unimatrix93
      TV backlight zener diode
      by unimatrix93
      Hello everyone, I'm repairing an LG TV backlight and I noticed some strange behavior when I touching the backlight strip with a missing Zener diode.

      So I replaced the leds on the strips and they seemingly working fine, but soon as I touch the strip which has a missing Zener diode the whole backlight turns off for a few seconds and then turns back on.

      Is this caused by the missing diode? If so what kind of zener diode should I use to replace it?.
      ​​​​
      The led strips has 9 6V leds.


      ​​​
      02-10-2025, 12:13 PM
    • Loading...
    • No more items.
    Working...