x7-v124 (h61) motherboard bios working 100%
-
-
Re: x7-v124 working 100%
Hello, do you have a version for this BIOS? the version i have on my board is 4.6.5.3, and it really sucks. There are very little changes you can make, you can't even change the boot order. Is it the same for you? -
Re: x7-v124 working 100%
Hi Mohammden - I used your BIOS post to flash a non-working x7-124 motherboard and it appeared to work. The issue is that the board is asking for a password in order to get to the BIOS. Do you know what the password is? I have tried all of the logical ones I could think of but nothing works. I even tried removing the CMOS battery to see if that would reset the BIOS but that did not work either. Any help you can provide is greatly appreciated.Comment
-
Re: x7-v124 working 100%
Hi Mohammden - No need to answer my question. I found another post that had a password decrypter tool that I used to find the password and it worked.Comment
-
Re: x7-v124 working 100%
thanksComment
-
Re: x7-v124 working 100%
thank you friendComment
-
Apologies if this is the wrong forum, but I'm not looking for a specific BIOS file, I'm trying to understand how one makes a clean BIOS file. So here's the background. I have 2 HP EliteDesk 800 g2 mini 35w pcs. One is working fine; the other doesn't have display out or working USB's nor does it have any flashing error lights. The CPU does get worm enough to cause the fan to spin up, so I think it's posting, but I just don't know. I had it working at one point but trouble started when I tried to put in a drive caddy that had a cooling fan on it. I thought it would be compatible but wasn't... -
Looking for a working BIOS for GIGABYTE G5 KD laptop motherboard NH50HPMB-0D
There are also markings on the motherboard
6-71-N5HP0-D04
SN/ 1TNH50HP000003054018
P/N 6-77-NH50HP00-D04-5C#1GB1
The problem is as follows
The laptop turns on, there is no image or backlight, after a minute the fans turn on, there is no old BIOS dump, please help​... -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
Hello everybody!
To put you in context I recently replaced the battery from my HP Pavilion 15 bc400ns with a used one, everything was going good. The same day, I decided to update the BIOS, everything went good. The thing occurred after I let the battery drain iddling on Windows 11 for the second time to calibrate it that the screen did not turn on again, the computer was on but the screen did not turn, like it would not wake from hibernation. I decided to restart the computer but got no video.
The thing is that I had installed TeamViewer and could log into the computer...
Comment