No Power DAZAARMB6E0 REV E

[prasath_max]

Re: No Power DAZAARMB6E0 REV E

since there is no shorts, try a jumper from pin5 of PQ17 to PR8(CMSRC side). Be careful not to connect at VA2 side. Plug your dc again and hopefully you will get 24V at pin4 of PQ17. Report back.

i got this fault i have motherboard. i bypass VA1 to VA2 side geting Gate votage 24v. directtly i connect dc in not pass throught PQ17 mosfert. try to replace mostfert and charging ic also not solve problam

[mcplslg123]

Re: No Power DAZAARMB6E0 REV E

You didnt followed correctly. I've clearly told not to short between VA1 and VA2. Jumper should be from pin5 of PQ17 to PR8(the side which is connected to pin3 of charging IC and not the other side of PR8). This will bypass the current sensing of Charging Chip. It works on Acer ZAAR/Quanta X12A and many more motherboards. This solution should be used when everything else fails as this is certainly not an ideal solution.

[eenee]

Re: No Power DAZAARMB6E0 REV E

This problem seems to be quite common. It seems to be a simple charger issue. Connect a decent acer charger and 19v will come on.

[teptronics]

Re: No Power DAZAARMB6E0 REV E

Just replace your charging IC and you're done.. Reply your update here after replacement