Troubleshooting 2xFailed Cooler Master v650 PSUs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Xebozone
    New Member
    • Sep 2019
    • 7
    • Australia

    #1

    Troubleshooting 2xFailed Cooler Master v650 PSUs

    I have a couple of these PSUs that have the exact same issue on both of them. I find it odd that they both exhibit the same Symptoms.

    When plugged into the PC, the PSUs are able to power the LEDs inside the motherboard (the standby 5v circuit I suppose?) But as soon as the power button is hit, the PSU powers on for a split second, then there is a (relay?) click and the PSU shuts off. Hitting power does nothing after unless the power is removed and then turned on again.

    I have a PSU tester which has the same results. As soon as the tester plugs in, it powers on for a split second, and then there's the click and it's off. Turning off the power switch does nothing. If I remove and replug the 24(?)pin power cable though, it does do the click on and off.

    I opened the PSU and looked inside, but cannot see any signs of failure.
    I noted a relay: 307H-1AH-FC 12V=DC that I believe is making the clicks.

    Any ideas of how to diagnose further?
    Attached Files
    Last edited by Xebozone; 02-19-2020, 04:20 AM.
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 31260
    • Albion

    #2
    Re: Troubleshooting 2xFailed Cooler Master v650 PSUs

    check the output diodes - it may be detecting a short circuit.

    Comment

    • Xebozone
      New Member
      • Sep 2019
      • 7
      • Australia

      #3
      Re: Troubleshooting 2xFailed Cooler Master v650 PSUs

      Originally posted by stj
      check the output diodes - it may be detecting a short circuit.

      Thank you.
      I'm new to electronics repair. Where would I locate the output diodes? There appear to be 4 or 5 diodes on the board.
      Would I need to remove the diodes to test them?

      Comment

      • stj
        Great Sage 齊天大聖
        • Dec 2009
        • 31260
        • Albion

        #4
        Re: Troubleshooting 2xFailed Cooler Master v650 PSUs

        try to take closer pictures - specially the 2 matching vertical boards

        Comment

        • Xebozone
          New Member
          • Sep 2019
          • 7
          • Australia

          #5
          Re: Troubleshooting 2xFailed Cooler Master v650 PSUs

          Thanks so much for your help.
          I've attached some photos from around the board including the vertical boards (I didn't see any diodes around there though). I've taken photos of areas where I can spot a diode
          Attached Files

          Comment

          • stj
            Great Sage 齊天大聖
            • Dec 2009
            • 31260
            • Albion

            #6
            Re: Troubleshooting 2xFailed Cooler Master v650 PSUs

            i think i know what they did.
            check ZD6, check all the transistors bolted to heatsinks,
            get the board out of the shell and see whats soldered to the other side.

            i think they are using mosfets instead of diodes.

            Comment

            • snipersquad100
              Badcaps Veteran
              • Nov 2013
              • 330
              • uk

              #7
              Re: Troubleshooting 2xFailed Cooler Master v650 PSUs

              Is it me or does this cap look suspicious?
              Attached Files

              Comment

              • Stefan Payne
                Badcaps Legend
                • Dec 2009
                • 1267
                • Germany

                #8
                Re: Troubleshooting 2xFailed Cooler Master v650 PSUs

                Not really...
                You need to start measrunging...
                Try looking for shorts.
                Polymer caps fail that way for example...

                Comment

                Related Topics

                Collapse

                Working...