Hp laserjet 5200n

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ghoshiry
    Senior Member
    • Dec 2016
    • 90
    • iran
    #1

    Hp laserjet 5200n

    Hello
    i need eeprom and nand file for this model printer
    hp laserjet5200n----nand ic is nand256w3a
    hp laserjet5200------nand ic is nand128w3a
    eeprom is 24c128
    tanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • tranquility
      Onkyo TX-NR809 – no hdmi, DTS or NAND chip ? stuck at starting kernel
      by tranquility
      Hello,
      i want to repair an Onkyo TX-NR809 receiver.

      symptoms:
      on power on, display appears and i hear one click. enue functions is given.
      - no hdmi output
      - audio output not tested, but i think it is not there
      - usb sticks are not recognized

      if i read out the chips with display+standby button + tone+
      both dts show only ????

      chip is D830K013BZKB4

      things i have done:
      - reflow of the dts chip without taking off and reballing
      - changed the aluminium caps without the big one with 25v because i dont...
      08-25-2025, 01:04 AM
    • SidneyCanadas
      93C46 and 93C56 EEPROM
      by SidneyCanadas
      I tore apart my instrument cluster for my 2008 Toyota Corolla made in 2007 in Cambridge, Ontario, Canada and pcb location: IC6=EEPROM is a surface mounted device with part # of 93C46W7, some claim the EEPROM out of a Camry part # 93C56 will allow odometer to roll over 299 999 KM or miles. The data sheet for both is below:

      https://cdn.badcaps-static.com/pdfs/...c6e42b20d3.pdf 2

      Anyone know if the Camry one will work on my Corolla?. And which EEPROM reader/writers do you all recommend I purchase that will allow me to read the old values of the old...
      06-14-2023, 01:16 PM
    • mattpd
      PS5 EDM-031 - Pulsing BLOD - SSD NAND chips never heat up
      by mattpd
      PS5 died in the middle of a game and never would boot again. Pulsing BLOD stays on forever but never boots.

      No LM damage. UART gives a generic "APU not responding" error.

      Under thermal camera, the SSD NAND chips stay stone cold. The controller warms, but not the NAND. I have a good 2.5v and 1.8v around the NANDs...

      I don't have a ton of PS5 experience, but I assume that the NAND would need to warm at least a little bit in order to boot...

      So to those with experience, would you expect at least a little heat from the NAND during...
      09-02-2025, 09:42 AM
    • Document Archive
      HP ProDesk 600 G4 + LaserJet Pro M15w ProDesk 600 i5-8500T Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP ProDesk 600 G4 + LaserJet Pro M15w can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G4 + LaserJet Pro M15w boardview and ProDesk 600 G4 + LaserJet Pro M15w schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
      09-12-2024, 02:20 PM
    • Document Archive
      HP ProDesk 600 G4 + LaserJet Pro M15w ProDesk 600 i7-8700 Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP ProDesk 600 G4 + LaserJet Pro M15w can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G4 + LaserJet Pro M15w boardview and ProDesk 600 G4 + LaserJet Pro M15w schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
      09-12-2024, 02:20 PM
    • Loading...
    • No more items.
    Working...