-
How to program IT8585E on RT809F (H) programmer?
It wont work on ITE_ADAPTER_V1.5 board (IT8580, IT8586, IT8587 work when soldered on board)
Please help.
I tried with cable for keyboard it does not work either (Laptop is G750JZ)
005: The currently selected:IT8585_ISP @PEB-1, capacity: 1Mbits, 128Kbytes.
006: http://www.ifix.net.cn/thread-47221-1-1.html
007: >------------------------------------OK---------------------------------------<
008: Wait for the chips enter into the ISP status, please wait...
009: Wait...10-28-2021, 01:35 PM -
Hi everyone,
I’m trying to bring a LG SK10Y soundbar back to life. Currently it is stuck in the “PLEASE WAIT” loop.
My conclusion so far is that something fails to boot fully, but it does start via eARC and can play perfectly good sound until watchdog shuts it down.
After dumping NAND with a T48 programmer, extracting with binwalk and exploring with Ghidra I think:- Kernel B is present, but no Kernel A. Is that normal?
- SquashFS A/B are present
- Bootloader is present
- UBI region is completely empty (only volume 0 / layout volume exists)
- No system.cfg,
11-13-2025, 03:19 PM -
Hi,
My LG Soundbar, SK10Y, has somehow ended up in an endless "PLEASE WAIT" loop and I am now starting to suspect that the firmware is causing this, and I can't manage to connect via the app to push a new firmware in as it never really starts.
I can trick it to start via HDMI ARC and it actually starts up, flashes OPTICAL and then goes to ARC where the sound (including sub) is perfect, but the white led indicator keeps blinking and after 20 seconds it says "GOOD BYE" and shuts down.
During these seconds the function button is not working... -
Dear Forum members
I searched for a forum on this model TV and could not find so thought I would start a thread on this model and make
I will upload some photos and share my trouble shooting steps so far -
The freebie laptop started to give error "BIOS wait EC input buffer empty fail (timeout). What does it mean, empty CMOS battery?
It boots if I press F1, the Bios also works, but it hangs for 1 second about 10 times a minute. So does the touchpad in Windows, USB-mouse works normally.
Working...
😀
😂
🥰
😘
🤢
😎
😞
😡
👍
👎
☕
Comment