Hello all,
a dead surface pro 4 arrived at my place some days ago.
It had a blown fuse (0ohm Resistor) and i replaced it.
After resistor replacement, i connected the display and checked the device and the device turned on. i just unplugged the power at surface logo and assembled the device back.
After that, i turned on the device again but no backlight at all. The LED Driver IC - MP3388s Vin is 0.35v before power on and 1.5v after turn on but still not enough to turn on the LEDs i think, as the driver ic needs 4.5V+. I see some spikes from 1.5V to 4V some times but still nothing.
Also, i found that the battery schottky diode was blown aswell and i replaced it.
Seems like a failed MP3388s. no?
Any idea?
Thank you
a dead surface pro 4 arrived at my place some days ago.
It had a blown fuse (0ohm Resistor) and i replaced it.
After resistor replacement, i connected the display and checked the device and the device turned on. i just unplugged the power at surface logo and assembled the device back.
After that, i turned on the device again but no backlight at all. The LED Driver IC - MP3388s Vin is 0.35v before power on and 1.5v after turn on but still not enough to turn on the LEDs i think, as the driver ic needs 4.5V+. I see some spikes from 1.5V to 4V some times but still nothing.
Also, i found that the battery schottky diode was blown aswell and i replaced it.
Seems like a failed MP3388s. no?
Any idea?
Thank you
Comment