Hi, have a MSI GP63 LEOPARD with a MS-16P5 motherboard that stars POST, but seems not finish successfully.
It has no lcd/hdmi image and any usb boot device led doesn't blink.
I have tested a new bios dump from MSI website and a good ddr4 module.
Power consumtion is about 1.4 to 1.6 amps (fluctuates) while start posting, and after 20 seconds changes to 1.306 amps.
+VCC_CORE is 0.999 volts during posting, then change to 0.0839 volts. (20 seconds later)
+VCCGT is 0.0 volts and after 20 seconds have a pulse of 0.8 volts and 200 milliseconds wide.
+VCCIO is 0. 98 volts
+VCCSA starts in 1.04v and changes to 0.91v
+1_8VSUS------1.796
+1.2VDIMM-----1.29v
+1.05VSUS-----1.049
FBVDDQ-----1.51v
NVVDD------0.808v
NVVDDS-----0.804v
Seems pch or cpu issue, but how to know?
Thanks for your help.
It has no lcd/hdmi image and any usb boot device led doesn't blink.
I have tested a new bios dump from MSI website and a good ddr4 module.
Power consumtion is about 1.4 to 1.6 amps (fluctuates) while start posting, and after 20 seconds changes to 1.306 amps.
+VCC_CORE is 0.999 volts during posting, then change to 0.0839 volts. (20 seconds later)
+VCCGT is 0.0 volts and after 20 seconds have a pulse of 0.8 volts and 200 milliseconds wide.
+VCCIO is 0. 98 volts
+VCCSA starts in 1.04v and changes to 0.91v
+1_8VSUS------1.796
+1.2VDIMM-----1.29v
+1.05VSUS-----1.049
FBVDDQ-----1.51v
NVVDD------0.808v
NVVDDS-----0.804v
Seems pch or cpu issue, but how to know?
Thanks for your help.
Comment