Announcement

Collapse
No announcement yet.

Help me to understand how this HoldPeak HP-990B smd tester works

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Help me to understand how this HoldPeak HP-990B smd tester works

    Hi can anyone explain how it works with smd tests the one I have a tweezer is called: HoldPeak HP-990B.
    I would like to understand if you test a component, for example a capacitor in continuity mode, then this should beep if it is open or short, otherwise it is "OL" that applies or ???
    Last edited by SMDFlea; 09-16-2021, 04:28 AM.

    #2
    Re: Help me to understand how this smd tester works

    put in capacitor test and short the probes . then try same switched to auto .

    Comment


      #3
      Re: Help me to understand how this smd tester works

      thank you and after that i can proceed to test?

      Comment


        #4
        Re: Help me to understand how this smd tester works

        it was just so you know what to expect when you find a short .

        Comment


          #5
          Re: Help me to understand how this smd tester works

          but what about my first question?

          Comment


            #6
            Re: Help me to understand how this smd tester works

            put in continuity mode then short the probes . its just same as a shorted anything .

            Comment


              #7
              Re: Help me to understand how this smd tester works

              important thing is the threshold of when it beeps ..think my meter goes to 18 ohms then over that it doesn't beep .

              Comment


                #8
                Re: Help me to understand how this smd tester works

                please I have done but i can not understand when it short with this tool please can you answer my first question with yes or no it helps me a lot and if you can add more info I will be very happy thank you

                Comment


                  #9
                  Re: Help me to understand how this smd tester works

                  Read the manual, it explains all the modes and what they do, and at what resistance the continuity test beeps.
                  Here is the manual, isn't GOOGLE a wonderful tool
                  Attached Files
                  Last edited by R_J; 09-06-2021, 07:06 PM.

                  Comment


                    #10
                    Re: Help me to understand how this smd tester works

                    Thanks everyone but I have received this smd test from a friend without manual therefore my questions I am grateful for all the information you can give me

                    Comment

                    Working...
                    X