Device works randomly for 1 sec for every 20 trial
so it is not really dead
by removing the relay top and pushing its mechanism the motor works normally but ofcourse while bypassing the speed control
I am not sure if the relay was the issue or something else
I have a question, how this relay works when I cant see any 24vdc supply
on the pcb to power it
hope to hear from you guys
here is video for how i bypassed the relay
https://www.youtube.com/watch?v=nKZg_bcCrR8
so it is not really dead
by removing the relay top and pushing its mechanism the motor works normally but ofcourse while bypassing the speed control
I am not sure if the relay was the issue or something else
I have a question, how this relay works when I cant see any 24vdc supply
on the pcb to power it
hope to hear from you guys
here is video for how i bypassed the relay
https://www.youtube.com/watch?v=nKZg_bcCrR8
Comment