Hello,
I have a LG 60PG70FD Plasma TV and suddenly the image became noisy with pink grain. It is an intermittent problem, sometimes it goes back to normal and after a few seconds it becomes noisy again.
I removed the ZSUS and YSUS boards. I tested for shorts and didn't find any. Removed some caps and tested ESR and capacitance, all OK.
I resoldered all ZSUS DIP components(including the inductors coils).
For the YSUS I resoldered all the inductors.
Vs and Va voltages are correct.
-Vy voltage is correct.
Z bias voltage is correct.
While trying to diagnose it, I found a way to activate the self test of this TV, as I searched everywhere and didn't find it. You just need to short pins 1 and 2 or 3 and 4 of the connector shown in this picture I took.
In my TV, the self test have the same noisy picture.
Do you have any tips of how to solve this issue?
I have a LG 60PG70FD Plasma TV and suddenly the image became noisy with pink grain. It is an intermittent problem, sometimes it goes back to normal and after a few seconds it becomes noisy again.
I removed the ZSUS and YSUS boards. I tested for shorts and didn't find any. Removed some caps and tested ESR and capacitance, all OK.
I resoldered all ZSUS DIP components(including the inductors coils).
For the YSUS I resoldered all the inductors.
Vs and Va voltages are correct.
-Vy voltage is correct.
Z bias voltage is correct.
While trying to diagnose it, I found a way to activate the self test of this TV, as I searched everywhere and didn't find it. You just need to short pins 1 and 2 or 3 and 4 of the connector shown in this picture I took.
In my TV, the self test have the same noisy picture.
Do you have any tips of how to solve this issue?
Comment