Announcement

Collapse
No announcement yet.

Dell 5010 3 Beeps - Auto power when plugged in

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Dell 5010 3 Beeps - Auto power when plugged in

    inspiron 5010 when plugged the adaptor power on automatically and after few sec start 3 beeps
    no display .... (cmos battery have 3.3 )

    #2
    Re: Dell 5010 3 Beeps - Auto power when plugged in

    For 3 Beeps shows following problems

    *. chipset Error (North and South bridge error, DMA/IMR/Timer error)
    *. Time-Of-Day Clock test failure
    *. Gate A20 failure
    *. Super I/O chip failure
    *. Keyboard controller test failure

    Check it

    Comment


      #3
      Re: Dell 5010 3 Beeps - Auto power when plugged in

      well i know that but i was hoping maybe someone have the same issue or help to find the problem

      Comment


        #4
        Re: Dell 5010 3 Beeps - Auto power when plugged in

        any idea guys ???
        i got another with same terms!
        this time 7 beeps but still when plugged the adapter auto turn on!

        Comment


          #5
          Re: Dell 5010 3 Beeps - Auto power when plugged in

          check the SIO pins to discover which one is not correct.

          Comment


            #6
            Re: Dell 5010 3 Beeps - Auto power when plugged in

            Dell 3542 give 3 beep i programme bios laptop work fine

            Comment


              #7
              Re: Dell 5010 3 Beeps - Auto power when plugged in

              bios have been programed and i change the i/o.... still the same

              Comment


                #8
                Re: Dell 5010 3 Beeps - Auto power when plugged in

                thank you

                Comment


                  #9
                  Re: Dell 5010 3 Beeps - Auto power when plugged in

                  hello brother i had same issue with dell 5010.

                  after checking little bit on board. i detect rt8205b is heating little bit.
                  so i replaced it with new one. and luckily it worked.

                  Comment

                  Working...
                  X