So I have a Parallax 7355 RV SMPS, and it accidentally got plugged into 240V AC (kinda my bad...) Anyways, I found this link on Google, and the photos in that link look exactly like my board - burn marks and all. The only difference is, the cap that is closest to the bridge rectifier blew. I don't have a 200v 1200uF cap. I DO, however, have a 200V 680uF cap.
Looking at the bottom of the board, it looks like one cap connects from the input of the rectifier to ground, the other connects the output of the bridge rectifier to ground, so it looks like it's just conditioning the voltage.
My question is, would I potentially be causing any problems by using the 680uF cap, or should I just be patient and order the right one?
Thank you,
Looking at the bottom of the board, it looks like one cap connects from the input of the rectifier to ground, the other connects the output of the bridge rectifier to ground, so it looks like it's just conditioning the voltage.
My question is, would I potentially be causing any problems by using the 680uF cap, or should I just be patient and order the right one?
Thank you,
Comment