Announcement

Collapse
No announcement yet.

Samsung UE40D8000YS Strange Issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung UE40D8000YS Strange Issue

    Hello

    Ive got this tv and its showing me some strange issue!
    When connecting the tv to AC there is no standby led also no voltage present on powersupply, Fuses they check out good.
    When i disconnect the cable to the mainboard the backlight goes on and there are voltages present on the powersupply.
    Also the fuse on the mainboard check out oke.
    When i follow the flowchart frist component to check out is IC203 but i cant find any datasheet on it.
    Also when powerboard is connected and i check the voltages on those parts there are zero.
    So something is drawing the powerboard down?
    Attached Files
    Last edited by trunks81; 09-19-2020, 09:32 AM.

    #2
    Re: Samsung UE40D8000YS Strange Issue

    Page 4.4, only after tests the power supply work are tests on the mainboard done.

    Comment


      #3
      Re: Samsung UE40D8000YS Strange Issue

      When connecting ac the relay does not click.
      Of i remove CN201 the relay clicks and BL goes on

      Comment


        #4
        Re: Samsung UE40D8000YS Strange Issue

        5V on pin 4 of CN201 ?

        Comment


          #5
          Re: Samsung UE40D8000YS Strange Issue

          Tested the board without an 1K present, and the Mainboard not connected.

          PIN 1 = B5V Present
          PIN 4 = A5V Present
          PIN 7 = B18VS Present
          PIN 11 = B13V Present

          Also IC203 measure 1,5ohm between to legs, So i think this one is defective,
          Only probleem i need to have the datasheet so i can check what the function is and wat the pinout is

          Comment

          Working...
          X