I have a Haier 50" LE50d3505b television that is "dead." No image, no standby lights, no sound, no nothing. The power supply board is HKL-500201A, and physical inspection looks good. I have tested the fuse (works) and the bridge rectifier (works). Also, the capacitors are not "puffy." However, a couple diodes seem to have faulty test results. I have tested diodes 10/11 using the "diode setting" on my multi-meter. I got .000 readings for both. For diodes 13/14, I got .177 for both readings. Do you think just these diodes are the issue? If so....would these be the correct diodes to replace them with: https://www.ebay.com/itm/11376729897...QAAOSwDw9bLDvU
Or, should I just try to find a brand new power supply board, in case there are more parts that are an issue in addition to the diodes? If so....is this the correct board to use: https://partstore.encompass.com/item...er/6007460228/
Thanks!
Or, should I just try to find a brand new power supply board, in case there are more parts that are an issue in addition to the diodes? If so....is this the correct board to use: https://partstore.encompass.com/item...er/6007460228/
Thanks!
Comment