Announcement

Collapse
No announcement yet.

43pus6401/12 - no picture, blinking ambi lights

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    43pus6401/12 - no picture, blinking ambi lights

    Hello i have 43pus6401/12.

    After turn on red light slowly blinking and ambilight blinking randomly, different colors fadein/out, etc

    Screen is black, no backlight. Caps look normal. I didnt measure it, I forgot my multimeter in another car.

    Any common issue?
    Thanks
    Attached Files

    #2
    Re: 43pus6401/12 - no picture, blinking ambi lights

    Vled pins shows all as it should be okey. What elae to check? Is mybe firmware?

    Comment


      #3
      Re: 43pus6401/12 - no picture, blinking ambi lights

      Firmware or cpu fault, these Phillips boards are trash.

      https://youtu.be/BD4J1JQcB7A
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment


        #4
        Re: 43pus6401/12 - no picture, blinking ambi lights

        New working board from ebay will work ?

        Comment


          #5
          Re: 43pus6401/12 - no picture, blinking ambi lights

          Replace led strips when you have no backlight and there is ambilight. When you take a good look when the tv starts up you will see a dark Philips logo in the middle of the display.

          Comment

          Working...
          X