JVC LT-48K780 firmware update

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • WhiteWolfHellas
    Senior Member
    • Jun 2019
    • 95
    • Greece

    #1

    JVC LT-48K780 firmware update

    Hello, I have a JVC LT-48K780
    Main board: 17MB211
    Panel: VES480UNDS-2D-N12

    I have backlight but the screen is black. I don't see any shorts on the panel's long t-con board so does this mean that the fault is in the firmware?
  • arizanotlari
    Senior Member
    • Nov 2014
    • 158
    • Turkiye

    #2
    Re: JVC LT-48K780 firmware update

    Hi.

    Try this : https://yadi.sk/d/AwljUblvUyV5mA
    https://www.badcaps.net

    Comment

    Related Topics

    Collapse

    • TheUser
      Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
      by TheUser
      Hello to everyone ,

      This is my first post here, and i would like to share with you a small story in case you can help me.

      Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

      All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

      I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
      02-10-2024, 02:07 PM
    • rumpumpel1
      ThinkPad X12 Detachable Gen 1: keyboard after firmware update without function
      by rumpumpel1
      Lenovo System Update offered me an update for the firmware of the Folio keyboard for my X12 Detachable Gen 1. The update got stuck and after 20 minutes I switched off the laptop. Since then, the keyboard and touchpad have been without function. Does anyone know how I can revive it?
      10-24-2024, 08:59 AM
    • dkneyle
      Sony KDL-46HX850 Can't upgrade/update firmware
      by dkneyle
      Diagnosed this TV as having a failed main board which I've replaced with one from a KDL 55HX850. They are (supposedly) the same board.

      Being 'Smart TV' it requires a firmware reboot when you swap out boards such as T-Con or main board. It starts with a black screen and flashing yellow and green LEDS, indicating it needs that firmware boot. The procedure described all over the web is to put the software into the root directory of a FAT32 formatted USB drive and it should load that up once plugged into USB1 port. But not for me. I can see the LED on the USB chip flash for about...
      09-25-2024, 10:44 PM
    • pp74
      Marantz NR1508 USB firmware update image
      by pp74
      Does anyone happen to have the latest firmware for the NR1508? Marantz took their update server down and customer support refuses to provide the image to flash over USB.


      Regards
      05-10-2025, 11:55 PM
    • Faluky
      firmware for Marantz SR5008 stuck in update loop
      by Faluky
      After an update it stopped playing audio and video, I have reset it as it says in the manual and tried to reinstall the firmware over the internet but logging failed each time and I tried to download the firmware to install it by usb but it does not appear on the official page, could you help me? Since it would be a shame to have to get rid of him, European version Thank you very much
      Best regards.

      Anyone got their hands on firmware for Marantz SR5008 stuck in update loop
      01-17-2023, 04:33 AM
    • Loading...
    • No more items.
    Working...