![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Join Date: Jan 2022
City & State: PRC
My Country: Germany
I'm a: Knowledge Seeker
Posts: 7
|
![]() Hey Folks,
I'm searching for a Full Flash Recovery Software for my Telefunken D43F287N4CWII Mainboard Vestel 17MB110S Panel: VES430UNDB-2D-N12 Productcode: 10119394 Does anyone know, where I can get it ? Or is it possible, to extract it from a working mainboard ? The Support Telefunken/Vestel GER couldn't help me. The Vestel TR Support didn't answer my email. History: The main problem with my Telefunken D43F287N4CWII was, it just goes out after a while, sometimes after a few minutes, sometimes after a few hours. Then I've swapped the mainboard for an identical model, all numbers on the exchange board are identical. At first, the new mainboard worked, but the colors weren't okay and neither the gamma values. Apparently the panel data in the new mainboard doesn't match my existing panel. Then, after a few "boot" processes, suddenly the new mainboard no longer started, only the red LED flashes. Then dismantled the old mainboard for a cross-check, it boots up correctly. Presumably the new mainboard now has to be completely reflashed with a recovery full flash software including the correctly panel software file Thk you vry much ![]() |
![]() |
![]() |
![]() |
#2 |
New Member
Join Date: Jan 2022
City & State: PRC
My Country: Germany
I'm a: Knowledge Seeker
Posts: 7
|
![]() Oh, is there no recovery firmware available für the Vestel 110S ?
![]() For the 110 and 110P i could find a '4-files-recovery' archive |
![]() |
![]() |
![]() |
#3 | |
Badcaps Veteran
Join Date: Feb 2013
City & State: SA
My Country: Germany
I'm a: Professional Tech
Posts: 3,547
|
![]() Quote:
cheap programmer CH341 can do the job. |
|
![]() |
![]() |
![]() |
#4 |
New Member
Join Date: Jan 2022
City & State: PRC
My Country: Germany
I'm a: Knowledge Seeker
Posts: 7
|
![]() I did it some days ago, I cloned the SPI with CH341 & the Clip.
Writing worked well, but it didn't help, the board still didn't work. I think, the TSOP48 Flash should be cloned/flashed, but I think there is not Clip for TSOP48 to flash it. I think. it must be unsoldered for flashing oder with some luck with the recovery files and these files are my hope ![]() |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Nov 2014
City & State: Diyarbakir
My Country: Turkiye
Line Voltage: 220VAC 50Hz
I'm a: Professional Tech
Posts: 142
|
![]() Hi.
Try these files ; https://disk.yandex.com.tr/d/1R-5fZtgh2fX6Q https://disk.yandex.com.tr/d/d3fnc5ghGrbx3A
__________________
Genç Elektronik ve Bilgisayar |
![]() |
![]() |
![]() |
#6 |
New Member
Join Date: Jan 2022
City & State: PRC
My Country: Germany
I'm a: Knowledge Seeker
Posts: 7
|
![]() Thank you very much for your files
I've tried to flash them. The TV didn't flash the files Press & hold OK -> Plug Power Cable in -> Power LED lights up 8x and USB Stick LED lights on too ... Then the Power LED lights on permanently, the USB Stick LED light off Not flashed ![]() I think the mainboard is still not recoverable (2 USB Sticks (FAT32), both USB Ports, both file archives tested) |
![]() |
![]() |
![]() |
#7 |
Badcaps Veteran
Join Date: Jan 2016
City & State: Sochi
My Country: russia
I'm a: Knowledge Seeker
Posts: 869
|
![]() Not all USB sticks will work, try old sticks up to 2Gb.
|
![]() |
![]() |
![]() |
#8 |
New Member
Join Date: Jan 2022
City & State: PRC
My Country: Germany
I'm a: Knowledge Seeker
Posts: 7
|
![]() The usb stick are 2GB and 8GB
I mean, i took one of them for core update on an other Vestel Telefunken TV But I'll try it with another one |
![]() |
![]() |
![]() |
#9 |
New Member
Join Date: Jan 2022
City & State: PRC
My Country: Germany
I'm a: Knowledge Seeker
Posts: 7
|
![]() Thank you very much for your help all.
It has worked now ![]() The problem was, I swapped 2 Telefunken remote controls and the OK button on the other remote did not appear to be the correct signal It has flashed it, but the TV goes on briefly and then goes off again. I just connected it to a damaged panel for testing, I will test again on a healthy panel and see what it shows. Maybe the board is lost for ever |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Nov 2014
City & State: Diyarbakir
My Country: Turkiye
Line Voltage: 220VAC 50Hz
I'm a: Professional Tech
Posts: 142
|
![]() don't plug lvds cable. mb must be working without panel. if mb goes standby again firmware not fit to tv.
send me a pm for more firmware. |
![]() |
![]() |
![]() |
#11 |
New Member
Join Date: Feb 2016
City & State: Razgrad
My Country: Bulagaria
I'm a: Knowledge Seeker
Posts: 2
|
![]() Hello and sorry for the wrong topick, but i am trying to reach your website, and it shows error that it is unreachable. I have tried multiple devices and computers and even vpn but no good. Again i am very sorry, i know that this is not the place to ask, but i dot know where to find you.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Nov 2014
City & State: Diyarbakir
My Country: Turkiye
Line Voltage: 220VAC 50Hz
I'm a: Professional Tech
Posts: 142
|
![]() Hi, thanks for asking.
I closed site due to low traffic (daily 500 visitor). Plus the selfishness of my colleagues began to piss me off. Anyone can contact me here, electroda.pl and **************** |
![]() |
![]() |
![]() |
#13 |
New Member
Join Date: Feb 2016
City & State: Razgrad
My Country: Bulagaria
I'm a: Knowledge Seeker
Posts: 2
|
![]() Thank you ! I will know where to find you now.
|
![]() |
![]() |
![]() |
#14 |
Badcaps Veteran
Join Date: Dec 2015
City & State: -
My Country: Europe
I'm a: Professional Tech
Posts: 332
|
![]() What about the old tips and links for firmwares that you had on the site? Is there any way we can get them back?
|
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: Nov 2014
City & State: Diyarbakir
My Country: Turkiye
Line Voltage: 220VAC 50Hz
I'm a: Professional Tech
Posts: 142
|
![]() Of course, I will continue to share the files, but I will keep the tips to myself for now
![]() |
![]() |
![]() |
![]() |
#16 |
Badcaps Veteran
Join Date: Dec 2015
City & State: -
My Country: Europe
I'm a: Professional Tech
Posts: 332
|
![]() |
![]() |
![]() |
![]() |
#17 | |
Senior Member
Join Date: Dec 2012
City & State: london uk
My Country: uk
I'm a: Knowledge Seeker
Posts: 188
|
![]() Quote:
![]() Take care Regards Anthony |
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|