ves236wnvb-2d-n13 is the panel
PQ profile please?
PQ profile please?
-
-
https://www.badcaps.net -
Re: Vestel ves236wnvb-2d-n13 picture upside down
Thanks! But does not work for me, i put it in the pq folder and service menu, USBComment
-
Re: Vestel ves236wnvb-2d-n13 picture upside down
If main is 17mb82 / 82s the 2 files are put directly on the stick without the pq folder.Comment
-
Re: Vestel ves236wnvb-2d-n13 picture upside down
main is 17MB140Comment
-
Re: Vestel ves236wnvb-2d-n13 picture upside down
Backup pq files to usb (downloadpq.mb140)
Open .tmg file via wordpad
Find line 71 and change it (0 or 1)
Save file and install to tv.https://www.badcaps.netComment
-
ALL LCD LED TV SERVICE MENU CODES
Service Menu Code with Board Name
China Universal Board / Jumper Board Service Menu Code
Changhong Ruba Service Menu Code
Ecostar LED TV Service Menu Code
Orient LED TV Service Menu Code
Haier LED TV Service Menu Code
TCL LED TV Service Menu Code
Samsung LED TV Service Menu Code
LG LED TV Service Menu Code
Videocon LED TV Service Menu Code
Supra LED TV Service Menu Code
Toshiba LED TV Service Menu Code
Symphony LED TV Service Menu Code
Veste/ LED TV Service Menu Code...10-31-2024, 03:58 AM -
Hello everyone,
I got a 58pus7805 that shows some weird behavior.
The menu and remote work fine and the picture is looking crisp and flawless while navigating the menu.
However, when a video source is displayed the screen either goes solid green (HDMI), solid black (SAT TV) or shows some fragments on mostly green background (AVI Playback from USB).
I tried to reinstall the firmware through the menu which was rejected saying it already had the latest version.
I managed to install the latest official firmware by holding the control button while plugging... -
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
Hoping someone has troden this path before !
I'm looking at a JVC LT-39c790 - a vestel based unit.
So, the remote turns it on, led's light up but no picture at all.
I have a spare mainboard, so I know its not that. The PSU seems ok too.
On the AUO T-Con I've got 16v on HAVDD_H but nothing on HAVDD_L - which I'm assuming should also be 16v ?
So, Ive resorted to testing eveything I can on the board as I can't find any schemas for it (AUO 39T15 C04 Ctrl Bd) and I think I've found a diode gone short. it marked D005 on the board and E1 on the package... -
This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.
Problem
TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
Comment