Announcement

Collapse
No announcement yet.

Iris skl 14236-1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Iris skl 14236-1

    HI i really need a scheamtic for this board





    I have burned to its capacitor

    #2
    Re: Iris skl 14236-1

    Schematic not available yet but none needed to fix the issue. clean the pads carefully and remove all residue carbon formed as a result of arcing. I thing the cap is a bypass cap for B+ 19v. Use DMM to verify continuity with B+ line. If its a bypass cap, simply use one from a spare board.

    Comment


      #3
      Re: Iris skl 14236-1

      Originally posted by anshad View Post
      Schematic not available yet but none needed to fix the issue. clean the pads carefully and remove all residue carbon formed as a result of arcing. I thing the cap is a bypass cap for B+ 19v. Use DMM to verify continuity with B+ line. If its a bypass cap, simply use one from a spare board.
      I dont know where is the B+ line side is?

      Comment


        #4
        Re: Iris skl 14236-1

        Originally posted by kalilinux25
        I dont know where is the B+ line side is?

        Trace the DC input line. Usually there will be two MOSFET for protection and then a current sense resistor [ CSR ] of 10/20 milli ohm. This CSR will be the usual distribution point for 19V to all ovver the board. From there B+ line goes to all PWM sectons like RAM supply, CPU supply, Chipset supply etc.

        Those who are familiar in board repair may easily find the CSR by simply looking on the board. If you are not familiar, may take some time but not hard to find. Once find the CSR, measure continuity from it to the Cap

        I have included two examples
        Attached Files
        Last edited by anshad; 07-04-2019, 01:51 AM.

        Comment


          #5
          Re: Iris skl 14236-1

          Just leave it here
          Attached Files

          Comment


            #6
            Re: Iris skl 14236-1

            Originally posted by kalilinux25 View Post
            Just leave it here
            Thank you very much Sir
            Last edited by SMDFlea; 07-06-2021, 04:00 PM. Reason: https://translate.google.com

            Comment


              #7
              Re: Iris skl 14236-1

              Thank you

              Comment


                #8
                Re: Iris skl 14236-1

                thanks

                Comment


                  #9
                  Re: Iris skl 14236-1

                  thank

                  Comment

                  Working...
                  X