LED Driver module

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • provider10
    Senior Member
    • Mar 2016
    • 52
    • South Africa
    #1

    LED Driver module

    Hi all

    just a quirky Has anybody used the Led driver module available from Banggood?

    " TV Backlight Driver Board TV Booster Constant Current Module High Voltage Board"

    If so how well do they work

    James
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • osrex
      LED DRIVER KEEPS DYING
      by osrex
      Hello, this is my first post and im just a beginner, so be easy on me guy. thanks



      i have a LED chandeilier that switches colors from white to cool white to warm when toggling the switch, it has 24 LED arms, each arm is 30 CM length.



      i have no datasheet at all for the LED lights, all i have is its length.



      long story short, testing the chandelier on the ground, and it works fine for 1 - 2 - 6 hours, no problem.



      as soon as i fix the chandelier to the ceiling and bury the driver inside the hub,...
      05-05-2025, 03:36 PM
    • AlexVG
      Replacing the WiFi module on a vacuum cleaner iROBOT i7
      by AlexVG
      Hi,
      I have had an iROBOT i7 with a camera error (error 68) version REV M, year 2018.

      I bought a liquid damaged Mainboard with WiFi module, from the same vacuum cleaner, but a different year and a different version (REV G).
      (This board does not respond, only the LEDs light up in a circle.
      The liquid damage is catastrophic and restoration is impractical).
      (I bought this board to get the WiFi module and camera).

      The boards are completely different in the installation of elements, even the connector for the WiFi module is different.

      If...
      10-22-2024, 07:20 AM
    • howardc64
      Vizio E55-F1 dark backlight zones. LED failure or Dimming Zone Driver?
      by howardc64
      Problem

      Fixing a dimming zone TV with LEDs not lighting up. Dimming zone circuit introduces added variable to diagnose LED and/or Dimming Zone Driver board? Some 1/2 rows of LEDs appears to be out in active dimming zone off AND some brightness flickering with active dimming zone high while playing changing video



      Model & Board Pics



      Conflicting Spec

      Vizio indicate this TV has 10 dimming zones. However, LED strips and Zoned light driver connector suggest 12

      https://www.shopjimmy.com/vizio-gj-2k1...
      10-10-2024, 01:16 PM
    • repair-it
      TOSHIBA DLP 52HM95 How to reset timer module on bulb
      by repair-it
      I replaced the bulb only on my Toshiba DLP The bulb is a TB-25. This is the first time I've done a bulb only replacement. Supposedly there is a timer module that needs to be re-calibrated or reset. I don't know where the module is located. I see some vendors selling the bulb with the housing stating module included which leads me to think the module is located inside the enclosure the bulb mounts in, but I didn't see it. Maybe it's inside the plug attached to the bulb?

      Anyway - I am seeking information on how to reset this so called module so that the lamp will operate. Apparently...
      10-11-2023, 07:18 PM
    • m1ch43lzm
      70mai Dash Cam A510 - help identifying connector on camera module
      by m1ch43lzm
      Hi everyone
      I have a 70mai Dash Cam A510 which failed after about 3 months of being installed in my car, likely due to heat, i got it from aliexpress so no point in trying to return it for warranty (and shipping it back would cost me almost the same as a new one from ali)
      The camera would boot loop showing 70mai logo on the screen, sometimes it would boot fine then the live view would freeze or display purple lines

      I already took it apart, and found out that the camera boots fine if i unplug the camera module from the main PCB, sometimes "playing" with the connector...
      05-11-2025, 06:02 PM
    • Loading...
    • No more items.
    Working...