Announcement

Collapse
No announcement yet.

where does the KBC gets its power from?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    where does the KBC gets its power from?

    if its from yhe 3.3v/5v regulator, where does the regulator gets its enable signals for the 3.3_ALW and 5v_ALW?

    Thaks

    #2
    Re: where does the KBC gets its power from?

    Depends on the Controller. Some will release VREG3 immediately after getting power and some need a dedicated Enable.
    And no, usually the EC doesn't get power from the 3.3V Coil but from a LDO, often called VREG3. However the source is usually the same controller. Need the controller model in question to clarify for your case.
    FairRepair on YouTube

    Comment

    Working...
    X