Board 820 2936 b water damage
Board was not booting, i cleaned the board and i got green light.
Board started to boot after restoring some bad joints
Fixed backlight and image
When i run asd efi for this board it shows up VD0R sensor reading above the limit...
If i remove the charger the error disappears.
I have the original 60w adapter.
Already tried a good known adapter 60w
And a80w adapter
All the same...
Also if the charger is plugged the pc freezes and is slow.
Please help!!!
Board was not booting, i cleaned the board and i got green light.
Board started to boot after restoring some bad joints
Fixed backlight and image
When i run asd efi for this board it shows up VD0R sensor reading above the limit...
If i remove the charger the error disappears.
I have the original 60w adapter.
Already tried a good known adapter 60w
And a80w adapter
All the same...
Also if the charger is plugged the pc freezes and is slow.
Please help!!!
Comment