Hello if your in the Uk and have a BGA rework station to reball an Ic. I will be willing to pay of course and will send the board to you. Please reply if so.
-
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/ -
Re: Anyone in the uk who can reball bga chips reply to this !
What IC Reecey ? -
Re: Anyone in the uk who can reball bga chips reply to this !
Its off a Tv motherboard, its the main processor Ic quite large tbh buddy. Would say at least 240 solder balls under it.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Anyone in the uk who can reball bga chips reply to this !
Without a stencil or a new IC with balls on already, i'd reflow it rather than reball it.
Any good mate ?Comment
-
Re: Anyone in the uk who can reball bga chips reply to this !
Yeah if you would buddy that would be great, how much are you thinking ? Send me a Pm and we can arrange something.Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
Re: Anyone in the uk who can reball bga chips reply to this !
PMd you bud.Comment
-
Re: Anyone in the uk who can reball bga chips reply to this !
Yeah be a pain in the ass to reball manually though no doubt a generic stencil will cover most.
I would do the same as diif though and reflow it.
Hey diif.. Just wondering what rework station you use?Comment
-
Re: Anyone in the uk who can reball bga chips reply to this !
Yeah, it is possible a generic stencil would do it, but considering the power supply suffered from dry joints a reflow should suffice.
It says Scotle, but i think it's a clone. Came with Elstein plates and has plenty of extra in the bottom heaters should i need it when i finally get round to looking at the stash of consoles i have in my loft.Attached FilesComment
-
-
Re: Anyone in the uk who can reball bga chips reply to this !
About the same as my BIRD AC5000
Comment
-
Re: Anyone in the uk who can reball bga chips reply to this !
Awesome, I have also replied to your Pm NTT
Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !
https://www.facebook.com/Telford-Tel...7894576335359/Comment
-
I'm looking to upgrade several 8GB 820-00850 boards to 16GB or 32GB for personal use. I am curious what the best practice and process is for sourcing new replacement chips, and what vendor(s) you guys prefer? Another question is, how do I find compatible chips and their corresponding part/model numbers? For example, in the 820-00850 schematic, the DDR chip U2600 model listed (EDFB232A1MA) corresponds to 1x32GB chip. Of course, I would need 4x8GB chips to replace the 4x2GB chips currently on the board. How do I find compatible 8GB chips? Is it as simple as searching "BGA178 8GB 2133"... -
Hi,
I asking for help on some new WSON8 256MB chips. Please share your experience. I faced error on some new chips on read, erase, write with different programmers. These new chips are not exist in any programmers database. (GD25B256D, XM25RH256, W25Q256JV so on.)
I'm using RT809F V.5.0, EZP2023 Pro, CH341A Green
For the exact experience with GD25B256DYIG is RT809F erase the chip under 33sec. This kind of 256MB chip normal erase time is 70-120sec so I think not all the partitions are erased. If I do blank check or reread the buffer says FFFFFF but when I write the correct... -
REWORK FLUXES Multifix 425-01 and 450-01 are tacky fluxes designed for use in a wide range of electronics assembly and rework processes. They represent a range of activities and residue levels to meet different customer requirements.
- No Clean Formulations
- Low residue
- Range of activity to deal with different component solderability
- Halide free
- Suitable for dispensing
- Compatible with solder coatings and/or No Clean flux cored solder wire product range
Both products are supplied in syringes or cartridges for application by dispensing....10-07-2024, 06:02 AM -
Hello dear badcappers!
The title pretty much says it all - do you, please, know if there's any way to troubleshoot which of the integrated RAM chips (LPDDR5X in this case) is faulty?
Backstory:
After replacing the 4 onboard (soldered) memory chips on a RoG Ally (4x4 GB to 4x8 GB) it got stuck on the RoG logo. I assume one of the chips is either not soldered properly or faulty. However after reflowing and replacing bunch of them I am still stuck at the same place.
If there is a way to narrow down which memory module is faulty it would make my life much... -
Hello again! (People are likely going to get tired of seeing posts from me lol)
I'd like to try and compile a list of known bad AMD/ATI Chipsets and graphics processors.
While I do not possess the knowledge of some of the brilliant minds on this forum, I can at least mention a few chips I've encountered as being troublesome.
1. ATI 216-0752001 (RS880M/RX280M) found inside 2 HP laptops, one I've since deemed screwed, and swapped the board to an intel one, the other HP seems to be less hateful and runs fine.
2. ATI Mobility Radeon X1600 and the...
Comment