Monitor Audio RSW-12 Schematics

[bmor]

Hi, I've been working on this subwoofer and got these from MA. Thought I would post them here in case anyone is interested. They told me there is no service manual.

[peterem74]

Re: Monitor Audio RSW-12 Schematics

Thank's schematics

[moan8452]

Re: Monitor Audio RSW-12 Schematics

Hi bmor
Do You have an address where You got the rsw12 schematics.
I need a set for rxw12

[bmor]

Re: Monitor Audio RSW-12 Schematics

This is the email for the office in the UK: technical@monitoraudio.group

[OgrusKornel]

Re: Monitor Audio RSW-12 Schematics

Thank for the Schems! You save my sub

[bmor]

Re: Monitor Audio RSW-12 Schematics

�� These subs are too nice to not try and fix them.

[marekshome]

Re: Monitor Audio RSW-12 Schematics

Thanks wery good help me this info...)

[r4dk01]

Re: Monitor Audio RSW-12 Schematics

Thank you for the schematics!

[tommyw]

Re: Monitor Audio RSW-12 Schematics

Thankyou for the schematics. That will make this fix a breeze. tommyw

[old_marantz]

Re: Monitor Audio RSW-12 Schematics

Can someone help me with this?

I got a new subwoofer amp from Monitor Audio to replace a broken one.

The new amp haa 12 hole molex ribbon cable that is suppose to go to the control board on top of the subwoofer (gray cable with black connector see pic). The existing control switch on the top of the subwoofer has a 8 pin connection (white connector see pic).

Since the wiring diagrams are attached to this post, can someone help me convert this 12 hole/wire molex to 8 pin? All these Monitor Audio Control switch are the same. So, most likely 4 of the connection on the gray ribbon cable arent used.

If anyone knows how to align this up or knows of a gender bender that might work, I'd owe you beers.

[old_marantz]

Re: Monitor Audio RSW-12 Schematics

Would the below be the schematic for the control board?

[R_J]

Re: Monitor Audio RSW-12 Schematics

If this is a new amp from Monitor Audio, why not ask them why it has the wrong plug? Might be safer then connecting it up wrong and damaging something.

[dobrykamil]

Re: Monitor Audio RSW-12 Schematics

Can someone help me with this?

I got a new subwoofer amp from Monitor Audio to replace a broken one.

The new amp haa 12 hole molex ribbon cable that is suppose to go to the control board on top of the subwoofer (gray cable with black connector see pic). The existing control switch on the top of the subwoofer has a 8 pin connection (white connector see pic).

Since the wiring diagrams are attached to this post, can someone help me convert this 12 hole/wire molex to 8 pin? All these Monitor Audio Control switch are the same. So, most likely 4 of the connection on the gray ribbon cable arent used.

If anyone knows how to align this up or knows of a gender bender that might work, I'd owe you beers.

You most likely have been sent wrong back plate mate.