I need help on this LENOVO G50-70 ACLU1/ACLU2 NA -A271 laptop.the problem is turning on then goes off unless you steady the probe to pin 3 and 4 of the power button. here is the voltages on of PINS ON JPWRB1
PIN1 +3VL =3.3V
PIN2 NOVO_BTN# = 3.3V
PIN3 ON/OFFBTN# = 0.94V ONLY
PIN 4 LID_SW# = 3.3V
PIN 5 AND PIN6 = GROUND
I check on kbc ON pin 110 PWRSW# =3.3v and resistors connected =3.3v
ANYONE can help me on this please
PIN1 +3VL =3.3V
PIN2 NOVO_BTN# = 3.3V
PIN3 ON/OFFBTN# = 0.94V ONLY
PIN 4 LID_SW# = 3.3V
PIN 5 AND PIN6 = GROUND
I check on kbc ON pin 110 PWRSW# =3.3v and resistors connected =3.3v
ANYONE can help me on this please
Comment