Working on Apple iPad Pro 9.7" A1673.. By mistake plugged in the LCD/Touch connectors when the battery was still screwed in. At once smoke started to come out of one of the caps & burnt a circuit trace... Cannot figure out where this trace goes. In the background all works fine, I can hear the sound & connects to the coumpter too. Anyone having the schematic for this, would greatly appreciate. Thanks in advance
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
Apple iPad Pro 9.7" A1673
Collapse
X
-
Re: Apple iPad Pro 9.7" A1673
For specific issues like no screen due to connecting LCD while hot, look for YouTube videos specifically addressing coil and diode replacement in the backlight section. I have nothing on this model either and faced with bat to ground bus short. There are several ones out here that might give you a clue where to look as the YouTubers usually have full board views they show in the video or they at least identify the components in the video which is basically what is needed. Best of luck to the searches for this boardview, I would be interested in as well.Last edited by piernov; 10-13-2022, 05:16 AM.
Comment
Comment