Acer A315-42 -R0X4 Model N19C1 LA-H801P

[kalilinux25]

Hope someone can share the schematic for this MB. Thanks in advance

[superdota2]

Re: EH5LP LA-H801P Rev:1B schematic

sir do you found schematic for this model, i badly need it too.

[Boghopperie]

Acer A315-42 -R0X4 Model N19C1

Can't find the schematic for this exact model but have found some similar. Trying to identify ceramic smd capacitors that have shorted around power input midgets just after power Jack and to identify type of mosfet for replacement won't clarify with a google. Any help would be greatly appreciated.

[Boghopperie]

Re: Acer A315-42 -R0X4 Model N19C1

These are the caps that I'm trying to identify and a couple look discoloured and are shorted so I suspect these are my culprits

[SMDFlea]

Re: Acer A315-42 -R0X4 Model N19C1

The motherboard part number should be silkscreened in white somewhere. LA-H801P or similar

[Boghopperie]

Re: Acer A315-42 -R0X4 Model N19C1

Good man. I'll take that apart and have a look.

[Boghopperie]

Re: Acer A315-42 -R0X4 Model N19C1

EH5LP LA-H801P Rev 1B 2019 - 04 - 22

These are the details screen printed on the motherboard

[DavideP]

Acer Aspire 3 A315-42-R5DM - EH5LP LA-H801P Schematic

Hi, I need:

Acer Aspire 3 A315-42-R5DM Service Manual
EH5LP LA-H801P Schematic

Also some advice why pc will turn on only after being in the refrigerator and turn off after a couple of minutes.

Thanks

[SMDFlea]

Re: Acer Aspire 3 A315-42-R5DM - EH5LP LA-H801P Schematic

Hi, I need:

Acer Aspire 3 A315-42-R5DM Service Manual
EH5LP LA-H801P Schematic

Also some advice why pc will turn on only after being in the refrigerator and turn off after a couple of minutes.

Thanks

This one might help https://www.badcaps.net/forum/showpo...63&postcount=3

[DavideP]

Re: Acer Aspire 3 A315-42-R5DM - EH5LP LA-H801P Schematic

This one might help https://www.badcaps.net/forum/showpo...63&postcount=3

Thanks SMDFlea, but that's not my board.

[DavideP]

Re: Acer A315-42 -R0X4 Model N19C1 LA-H801P

Update: I remove CPU cooling, cleaned and put thermal paste again. It worked for 5 minutes and now it's back as before.

Any ideas?