Trouble ID’ing C3 Cap.

Tommlynn49 · 10-02-2021, 09:31 AM

This is a Jenn Air stove model # JMW8527 AAW. NO clock or temp. light.
Disassembled and can see burn spot on one leg of the C3 cap. at the board hole. There is a resistor on that leg also. Only markings on the cap are: RGA105C and H245M. Can’t seem to I’D as to the it’s capacitance or voltage in order to order a new one. Any help would be greatly appreciated.

s675 · 10-02-2021, 09:36 AM

Could be the Lelon RGA series.

RGA = series
105C = temp rating
H245 = ?
M = 20% tolerance

Other Lelon RGA show things like H136 and H736.

s675 · 10-02-2021, 09:43 AM

Do you know the dimensions and lead pitch?

s675 · 10-02-2021, 09:50 AM

Here's the part number scheme I found. Doesn't seem to tell you anything.

**R_J** · 10-02-2021, 11:14 AM

Post a picture, I suspect the value is marked on the other side of the capacitor, similar to this one.

Tommlynn49 · 10-02-2021, 02:49 PM

Thanks everyone. This gives me some guidance. I haven’t de soldered and removed the unit yet. As suggested, it may be labeled on the side I can’t see as it’s mounted horizontally and only exposes the upper top portion. I failed to mention, it is a Lelon. Many thanks again.

10-02-2021, 09:31 AM	#1
Tommlynn49 New Member Join Date: Oct 2021 City & State: Walnut Creek ca. My Country: Us I'm a: Knowledge Seeker Posts: 3	Trouble ID’ing C3 Cap. This is a Jenn Air stove model # JMW8527 AAW. NO clock or temp. light. Disassembled and can see burn spot on one leg of the C3 cap. at the board hole. There is a resistor on that leg also. Only markings on the cap are: RGA105C and H245M. Can’t seem to I’D as to the it’s capacitance or voltage in order to order a new one. Any help would be greatly appreciated.

10-02-2021, 09:36 AM	#2
s675 Member Join Date: Sep 2015 City & State: Essex My Country: UK Line Voltage: 240VAC 50Hz I'm a: Knowledge Seeker Posts: 28	Re: Trouble ID’ing C3 Cap. Could be the Lelon RGA series. RGA = series 105C = temp rating H245 = ? M = 20% tolerance Other Lelon RGA show things like H136 and H736.

10-02-2021, 09:43 AM	#3
s675 Member Join Date: Sep 2015 City & State: Essex My Country: UK Line Voltage: 240VAC 50Hz I'm a: Knowledge Seeker Posts: 28	Re: Trouble ID’ing C3 Cap. Do you know the dimensions and lead pitch?

10-02-2021, 02:49 PM	#6
Tommlynn49 New Member Join Date: Oct 2021 City & State: Walnut Creek ca. My Country: Us I'm a: Knowledge Seeker Posts: 3	Re: Trouble ID’ing C3 Cap. Thanks everyone. This gives me some guidance. I haven’t de soldered and removed the unit yet. As suggested, it may be labeled on the side I can’t see as it’s mounted horizontally and only exposes the upper top portion. I failed to mention, it is a Lelon. Many thanks again. Last edited by Tommlynn49; 10-02-2021 at 02:50 PM.. Reason: Punctuation correction

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode