Trouble ID’ing C3 Cap.

Tommlynn49 · 10-02-2021, 09:31 AM

This is a Jenn Air stove model # JMW8527 AAW. NO clock or temp. light.
Disassembled and can see burn spot on one leg of the C3 cap. at the board hole. There is a resistor on that leg also. Only markings on the cap are: RGA105C and H245M. Can’t seem to I’D as to the it’s capacitance or voltage in order to order a new one. Any help would be greatly appreciated.

10-02-2021, 09:31 AM	#1
Tommlynn49 New Member Join Date: Oct 2021 City & State: Walnut Creek ca. My Country: Us I'm a: Knowledge Seeker Posts: 3	Trouble ID’ing C3 Cap. This is a Jenn Air stove model # JMW8527 AAW. NO clock or temp. light. Disassembled and can see burn spot on one leg of the C3 cap. at the board hole. There is a resistor on that leg also. Only markings on the cap are: RGA105C and H245M. Can’t seem to I’D as to the it’s capacitance or voltage in order to order a new one. Any help would be greatly appreciated.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode