Finally finished the task of creating the board view file and cleaning the schematic pdf
So if you find any error please reply here and will see if a can and/or want to correct them. ( 1 SIDE NOTE the ic UP102 and components are not on the actual board but are there to connect the signals)
So enjoy the hard work.
thanks man, when you visit Nigeria, i owe you a big fish and better palm wine
Finally finished the task of creating the board view file and cleaning the schematic pdf
So if you find any error please reply here and will see if a can and/or want to correct them. ( 1 SIDE NOTE the ic UP102 and components are not on the actual board but are there to connect the signals)
Hi mate, Thank you very much for shared file!
Can you advise me please, how I can open this BVR file?
I tried different versions of board viewers but this file isn't compatible with it.
Thank you again, mate (-;
Re: Macbook pro M1 A2338 820-02020 schematics boardview
FYI, OBV now supports reading BVR3 files, including this board. I added the support for this to OBV as I didn't want to buy FlexBV just to check a single board view, and after looking at the format it seemed straightforward enough. The support is included since release 9.0, so if you get the latest version of OBV from GitHub now it'll read this file.
Finally finished the task of creating the board view file and cleaning the schematic pdf
So if you find any error please reply here and will see if a can and/or want to correct them. ( 1 SIDE NOTE the ic UP102 and components are not on the actual board but are there to connect the signals)
Comment